Page 2 - Symbols; SYMBOL EXPLANATION
2 – English Symbols • Warning! The blade continues to rotate even after the engine hasstopped. When the engine has stopped, stopthe blade from rotating by lettingthe blade come in contact with theground. Indicates the direction of rotation. SYMBOL EXPLANATION WARNING! The edger can bedangerous!Carel...
Page 3 - Before using a new machine; List of contents; CONTENTS
English – 3 Before using a new machine • Read the Operator‘s Manual carefully.• Check the assembly and adjustment of the cutting equipment. See page 13. • Start the machine and check the carburetor settings. See page 16-17. IMPORTANT! A too lean carburetor adjustment significantlyincreases the risk ...
Page 4 - The machine‘s safety equipment; Personal protective equipment; SAFETY INSTRUCTIONS
4 – English The machine‘s safety equipment This section describes the machine‘s safety equipment, itsfunction and how checks and maintenance are carried out toensure that it operates correctly. (See the chapter “What is what“ to locate where this equipment is positioned on yourmachine.) Personal pro...
Page 8 - Safety instructions before starting work; General safety instructions; Personal protection
8 – English Safety instructions before starting work • Inspect the working area. Remove loose objects such as stones, broken glass, nails, steel wire, string, etc. that can bethrown or become entangled in the blade or blade guard. • Keep unauthorised persons at a distance. Children, animals, onlooke...
Page 9 - Transport and storage; Start
English – 9 Transport and storage • Store and transport the machine and fuel so that any leakage or fumes do not risk coming into contact with sparks or nakedflames. For example, electric machines, electric motors,electrical switches/power switches, heaters or the like. • When storing and transporti...
Page 10 - General working instructions; Basic safety precautions
10 – English General working instructions Basic working techniques Basic safety precautions 1. Observe your surroundings: • To ensure that people, animals or other things cannot affect your control of the machine. • To ensure that the above mentioned do not come into contact with the cutting equipme...
Page 11 - Safety instructions after completing work
English – 11 SAFETY INSTRUCTIONS Safety instructions after completing work • Ensure the blade has stopped before cleaning,carrying out repairs or aninspection. Remove the sparkplug cable from the sparkplug. • Wear heavy-duty gloves when carrying out repairs onthe edger. • Store the machine out of re...
Page 12 - What is what on the edger?
12 – English WHAT IS WHAT? 26 24 21 1 1 4 21 21 20 4 What is what on the edger? 1. Blade 2. Grease filler cap 3. Angle gear 4. Blade guard 5. Shaft 6. Loop handlebar 7. Throttle 8. Stop switch 9. Throttle trigger lock 10. Suspension for harness 11. Cylinder cover 12. Starter handle 13. Fuel tank 14....
Page 13 - Assembling the blade; ASSEMBLY; Assembling the loop handlebar
English – 13 Assembling the blade Fit the blade as follows: 1. Fit the drive disc (A) on theoutgoing shaft. Make surethat the edge that fits inthe hole of the blade isfacing outward. 2. Block the blade rotation byinserting locking pin in thehole behind the bladeguard engaging it in thecorresponding ...
Page 14 - FUEL HANDLING; Fuel mixture; Mixture
14 – English NOTE!The edger is fitted with two-stroke engines and must always berun on a mixture of gasoline and two-stroke oil. To ensure thecorrect mixture proportions it is important to measure thequantity of oil accurately. When mixing small amounts of fuelsmall discrepancies in the amount of oi...
Page 15 - Control before starting; START AND STOP; Start and stop
English – 15 Control before starting WARNING!When the engine starts with the choke lever inthe choke or starter throttle position thecutting tool (blade or trimmer) starts to rotateimmediately. START AND STOP For reasons of safety followthese recommendations! • Check that the support flange is not c...
Page 16 - Basic setting; MAINTENANCE; Carburetor; Operation
16 – English Basic setting • The carburetor is set to its basic setting when test run at the factory. The basic setting should be kept during the machine‘sfirst working hours. Thereafter the carburetor should be finelyadjusted. Fine adjustment should be carried out by a skilledtechnician. NOTE! If t...
Page 17 - Correctly adjusted carburetor; Final setting of the idling speed T
English – 17 Correctly adjusted carburetor A correctly adjusted carburetor means that the machineaccelerates without hesitation and the machine 4-cycles alittle at max speed. Furthermore, the cutting attachmentmust not rotate/move at idling. A too lean adjusted lowspeed needle L may cause starting d...
Page 18 - Muffler with catalytic converter; Cooling system
18 – English A muffler fitted with a catalytic converter reduces the extent ofthe following substances in the exhaust fumes: • Hydrocarbons (HC). Some hydrocarbons in gasoline and the exhaust are carcinogenic. • Nitric oxides (NO). Irritating for the breathing air-ways.• Aldehydes. The most common f...
Page 19 - Lubricating the flexible drive axle; Spark plug; Angle gear
English – 19 Lubricating the flexible drive axle Adjusting the edger‘s cutting depth MAINTENANCE Spark plug The condition of the sparkplug is affected by: • An incorrect carburetor setting. • An incorrect fuel mixture (too much or faulty oil). • A dirty air filter. These factors causedeposits on the...
Page 20 - Maintenance schedule; Daily maintenance; Weekly maintenance; Monthly maintenance
20 – English NOTE: Use only HUSQVARNA replacement parts. Use of otherbrands of replacement parts can cause damage to your unit orinjury to the operator or others. Your warranty does not coverdamage or liability caused by the use of accessories and/orattachments not specifically recommended by HUSQVA...
Page 21 - TECHNICAL DATA; Technical data
English – 21 TECHNICAL DATA Technical data Engine Cylinder capacity, cu. in/cm 3 Cylinder bore, inch/mmStroke length, inch/mmRecommended max. speed, rpmMax. speed, should not be exceeded, rpmIdling speed, rpmSpeed of output axle, rpmMax. engine output, acc. to ISO 8893 Ignition system Manufacturer/t...
Page 22 - FEDERAL AND CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
22 – English YOUR WARRANTY RIGHTS ANDOBLIGATIONS The EPA (U.S. Environmental Protection Agency), Carb(California Air Resources Board) and Husqvarna Forest &Garden are pleased to explain the emissions control systemwarranty on your 1997 and later Lawn and Garden EquipmentEngine. In U.S., new util...
Page 23 - NOTES
