Honeywell RTH7560E1001/E - User Manual

Honeywell RTH7560E1001/E

Honeywell RTH7560E1001/E Thermostat – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
Page: / 40

Table of Contents:

  • Page 2 – Removing your old thermostat; Check that your system is off.; Make sure there are no; Do you have thick black wires with; Read and save these instructions
  • Page 3 – Y R RC
  • Page 4 – Disconnect the wires and remove the old wall plate.; match the letter on the terminal.; Bundle and insert wires through the UWP.; Pull open the UWP and insert the bundle of
  • Page 5 – up
  • Page 6 – Mount the UWP and close the; Attach your thermostat.; Connect wires from Step 8.
  • Page 7 – Choose a clock format.; Set date and time
  • Page 8 – If this is not a new installation,; Select System Setup options.; Select; Continue to “System operation; System Setup; System Setup options
  • Page 9 – Once you have cycled through all of the System Setup numbers,; Done; is
  • Page 10 – Fan operation settings; Fan; System operation settings; Mode
  • Page 12 – Cancel; Wiring—conventional systems
  • Page 13 – Wiring—heat pump; NOT
  • Page 14 – Advanced menu
  • Page 15 – Smart Response® Technology; Menu; Setting the time
  • Page 16 – PROG; Set the date; Alerts screen
  • Page 17 – Alerts codes
  • Page 18 – Most problems can be corrected quickly and easily.; Terminal; Troubleshooting
  • Page 19 – -year limited warranty
  • Page 20 – Customer assistance; CAUTION: MERCURY NOTICE
  • Page 21 – Thermostat programmable; Guide d’installation rapide; Outils requis; Inclus dans cette boîte
  • Page 22 – Retrait de l’ancien thermostat; D’épais fils noirs sont-ils présents; Veuillez lire le mode d’emploi et le conserver en lieu sûr
  • Page 24 – Débranchez les fils et retirez l’ancienne plaque murale.; Pour éviter que les fils ne tombent derrière le mur, enroulez-les; Regroupez et insérez les fils dans le; Ouvrez le système UWP et insérez le faisceau
  • Page 27 – Réglage de l’heure et de la date
  • Page 28 – S’il ne s’agit pas d’une; Configuration du système; Options de configuration du système
  • Page 29 – Après être passé par tous les numéros de configuration du système,
  • Page 30 – Réglages pour le fonctionnement du ventilateur; Réglages pour le fonctionnement du système
  • Page 32 – Câblage—Systèmes conventionnels; Câblage alternatif (systèmes conventionnels)
  • Page 33 – Câblage—Systèmes à thermopompe; Les étiquettes ne correspondent pas?; Câblage alternatif (pour les thermopompes uniquement); position haute; REMARQUE
  • Page 34 – Menu avancé
  • Page 35 – Technologie Smart Response®; Réglage de l’heure
  • Page 36 – Réglage de la date; Écran d’alerte
  • Page 37 – Codes d’alerte; Mettez l’alerte en pause.
  • Page 38 – Borne; Dépannage
  • Page 39 – Garantie limitée de 1 an
  • Page 40 – Service à la clientèle; MISE EN GARDE : AVIS RELATIF AU MERCURE
Loading the manual

RTH7400,

RTH7500 Series

Programmable Thermostat

Quick Installation Guide

Heat

Tools you will need

Tools you may need

Wire stripper

Needle-nose pliers

Drill and

drill bit

(See step 11)

Included in your box

Screws and

anchors

UWP™

Mounting

System

(UWP)

RTH7400/

RTH7500Thermostat

Quick Install Guide

Small flat head screwdriver

Phillips screwdriver

Pencil

Level

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Removing your old thermostat; Check that your system is off.; Make sure there are no; Do you have thick black wires with; Read and save these instructions

2 Quick Installation Guide Removing your old thermostat 2 Check that your system is off. Change the temperature on your old thermostat. If you don’t hear the system turn on within 5 minutes, the power is off. Note: If you have a digital thermostat that has a blank display, skip this step 1 Turn powe...

Page 3 - Y R RC

3 RTH7400/RTH7500 Series 5 Take a picture of how your wiring looks right now. Be sure to include the letters next to the terminals where the wires are inserted. This will be a helpful reference when wiring your thermostat. Tip: If the color of your wires has faded or if 2 terminals have the same wir...

Page 4 - Disconnect the wires and remove the old wall plate.; match the letter on the terminal.; Bundle and insert wires through the UWP.; Pull open the UWP and insert the bundle of

4 Quick Installation Guide 9 Disconnect the wires and remove the old wall plate. Use a screwdriver to release wires from terminals. Then, use a wire label to identify each wire as it’s disconnected. The letter on the wire label should match the letter on the terminal. Tip: To prevent wires from fall...

Other Honeywell Thermostats Models