Heath Zenith 5630 - Manual
Heath Zenith 5630 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTaLLaTION; FEaTurE; MODE SwITCHING SuMMary; MANUAL MODE; DUSK
- Page 3 – BuLB INSTaLLaTION
- Page 4 – SET LIGHT CONTrOLS; SPECIFICaTIONS; TrOuBLESHOOTING GuIDE; Maximum Range
- Page 5 – TECHNICaL SErvICE; NO SErvICE ParTS avaILaBLE FOr THIS PrODuCT
- Page 6 – Para PruEBa; OPEraCIÓN; Para NOrMaL; rEquISITOS
- Page 7 – Característica D; PRUEBA; INSTaLaCIÓN
- Page 8 – INSTaLaCIÓN DE La BOMBILLa
- Page 9 – Lo menos sensible
- Page 10 – SErvICIO TÉCNICO; de devolver el producto a la tienda.; NO Hay PIEZaS DE SErvICIO DISPONIBLES Para ESTE PrODuCTO.
- Page 11 – ESSaI; FONCTIONNEMENT; PrIOrITÉ MaNuELLE; auTOMaTIquE; EXIGENCES
- Page 12 – Fonction D; PRIORITÉ MANUELLE
- Page 13 – INSTaLLaTION DE La LaMPE
- Page 14 – rÉGLaGE DES COMMaNDES; FICHE TECHNIquE; GuIDE DE DÉPaNNaGE; Portée maximale
- Page 15 – GaraNTIE LIMITÉE DE 5 aNS; SErvICE TECHNIquE; avant de retourner l’article au magasin.; aucune pièce de rechange n’est disponible pour ce produit.
Model 5630
D
ual
B
rite
®
Security
Light
© 2007 HeathCo LLC
598-1132-06
TEST
FEaTurES
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• D
ual
B
rite
®
feature for dusk to dawn low level lighting.
• Photocell keeps the lighting off during daylight
hours.
ON-TIME
Put ON-TIME switch inside wall light
in the TEST position.
OPEraTION
* resets to Normal Mode at dawn.
MaNuaL MODE
ON-TIME
... back on.
NOrMaL
1 Second OFF
then...
Note:
When first turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
This package includes:
Wall Light
Sensor
3 Wire Connectors
rEquIrEMENTS
• The light control requires 120 Volts AC, 60 Hz.
• If you want to use Manual Mode, the control must be
wired through a switch.
•
S o m e c o d e s r e q u i r e i n s t a l l a t i o n b y a
qualified electrician.
1 Halogen Lamp
20
5
1
TEST
20
5
1
TEST
Put the ON-TIME switch in the 1, 5,
or 20 minute position.
Manual mode only works at night
because daylight returns the sensor
to Normal.
Flip the light switch off for one sec-
ond then back on to toggle between
Normal and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 20
position.
4 Mounting Screws
Mode:
On-Time:
Works:
Day
Night
Test
5 Sec
x
x
Normal
1, 5, 20 min.
x
Manual
Until Dawn*
x
1 Adapter Bracket
Meets the ENERGY STAR
®
guidelines
when D
ual
B
rite
®
function is off and
ON-TIME is 1 or 5 minutes.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 598-1132-06 INSTaLLaTION For easy installation, select an existing wall mounted light fixture with a wall switch for replacement.For best performance, mount the fixture between 6 and 8 feet (2.4 m) above the ground. Note: Mounting fixture higher than 8 ft. (2.4 m) will reduce coverage distance. 1....
3 598-1132-06 white to white Black to Black Junction box ground wire to Green ground wire on fixture. 6. Twist the junction box wires and fixture wires together as shown. Secure with wire connectors. 5. Apply caulk to the face of the adapter. This will seal the back of the fixture to the adapter. Ju...
4 598-1132-06 SET LIGHT CONTrOLS 1. Select desired ON-TIME for the light to stay on after motion is detected (1, 5, or 20 minutes). 2. Set D ual B rite ® control to Dusk-to-Dawn (DIM) or Normal. Note: Meets the ENERGY STAR ® guidelines when D ual B rite ® function is off and ON-TIME is 1 or 5 minute...