Page 3 - Table of Contents
Table of Contents INTRODuCTION ............................................... 2 manual accuracy ........................................... 2Contact info.................................................... 2machine description ...................................... 2identification ....................
Page 4 - INTRODuCTION; Manual Accuracy; Contact Info
-2- model g1014z/g1014zX (mfg. 11/07+) INTRODuCTION Manual Accuracy We are proud to offer this manual with your new machine! We've made every effort to be exact with the instructions, specifications, drawings, and photographs of the machine we used when writ-ing this manual. however, sometimes error...
Page 5 - Identification; NOTICE
model g1014z/g1014zX (mfg. 11/07+) -3- figure 1. g1014zX identification. Identification NOTICE If you have never used this type of machine or equipment before, WE STRONGLy RECOMMEND that you read books, review industry trade magazines, or get formal training before beginning any projects. Regardless...
Page 6 - DISC Z SERIES
-4- model g1014z/g1014zX (mfg. 11/07+) The information contained herein is deemed accurate as of 4/5/2009 and represents our most recent product specifications. Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2 Model G1014Z M...
Page 8 - MODEL G1014ZX COMBINATION SANDER WITH CABINET
-6- model g1014z/g1014zX (mfg. 11/07+) The information contained herein is deemed accurate as of 4/5/2009 and represents our most recent product specifications. Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 3 Model G1014ZX ...
Page 11 - Safety Instructions for Machinery
model g1014z/g1014zX (mfg. 11/07+) -9- Safety Instructions for Machinery !,7!93 53% (%!2).' 02/4%#4)/. 7(%. /0%2!4).' -!#().%29BVX]^cZgn cd^hZ XVc XVjhZ eZgbVcZci ]ZVg^c\adhh# 7%!2 02/0%2 !00!2%, 9D CDI lZVgaddhZXadi]^c\!\adkZh!cZX`i^Zh!g^c\h! dg _ZlZagn i]Vi XVc XViX] ^c bdk^c\ eVgih# LZVg egdiZXi^...
Page 13 - Safety for Belt and Disc Sanders
model g1014z/g1014zX (mfg. 11/07+) -11- No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. use this and other machinery with caution and respect. failure to do so could result in seriou...
Page 14 - SECTION 2: CIRCuIT REQuIREMENTS; full Load Amperage Draw
-12- model g1014z/g1014zX (mfg. 11/07+) Serious personal injury could occur if you connect the machine to power before com- pleting the setup process. DO NOT connect the machine to the power until instructed later in this manual. 110/220v Operation SECTION 2: CIRCuIT REQuIREMENTS full Load Amperage ...
Page 15 - Needed for Setup; unpacking
model g1014z/g1014zX (mfg. 11/07+) -13- Wear safety glasses dur- ing the entire setup pro- cess! This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine! SECTION 3: SETup the ...
Page 18 - hardware Recognition Chart
-16- model g1014z/g1014zX (mfg. 11/07+) hardware Recognition Chart
Page 19 - Floor Load; Placement Location; Site Considerations; Clean Up
-18- Model G1014Z/G1014ZX (Mfg. 11/07+) Floor Load Refer to the Machine Data Sheet for the weight and footprint specifications of your machine. Some residential floors or workbenches may require additional reinforcement to support the machine and operator or machine and workpiece. Placement Location...
Page 20 - Bolting to Concrete floors; Mounting to Shop; Mobile Base
-18- model g1014z/g1014zX (mfg. 11/07+) although not required, we recommend that you mount your new model g1014z sander to the floor. the model g1014zX sander cabinet cannot be mounted to the floor because the mounting holes cannot be accessed through the cabinet. however, you can use machine mounts...
Page 21 - Assembly; Mounting to
model g1014z/g1014zX (mfg. 11/07+) -19- you can mount your model g1014z/g1014zX to a workbench through the holes in the base, instead of using the included stand or cabinet. the strongest mounting option is a "through mount" where holes are drilled all the way through the workbench, and hex ...
Page 23 - Sanding unit
model g1014z/g1014zX (mfg. 11/07+) -21- 9. ( Optional ) place a level on top of the stand ( figure 20) and adjust the stand if needed by shimming the feet so it is level from front-to-back and side-to-side. figure 20. leveling stand. G1014ZX Cabinet Assembly To assemble the G1014ZX cabinet: 1. place...
Page 30 - Dust Collection
-28- model g1014z/g1014zX (mfg. 11/07+) figure 48 shows a 2" dust hose connected to the dust collection port with a hose clamp. figure 48. hose attached to 2 1 ⁄ 2 " dust port. figure 47. hose attached to 2" dust port. the model g1014z/g1014zX features a 2" dust port and a 2 1 ⁄ 2 &#...
Page 31 - Test Run
model g1014z/g1014zX (mfg. 11/07+) -29- 7. loosen the lock nut on the tracking control knob, and carefully adjust the tracking in small increments toward the front or back of the sander frame until the sanding belt remains centered on the main roller (see figure 45, page 27). 8. When the tracking is...
Page 32 - SECTION 4: OpERATIONS; Basic Controls
-30- model g1014z/g1014zX (mfg. 11/07+) SECTION 4: OpERATIONS Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine. NOTICE If you have never used this type of machine or equipment ...
Page 33 - Operation Overview
model g1014z/g1014zX (mfg. 11/07+) -31- Table Tilt: use to tilt the table relative to the sanding disc or the sanding belt. to tilt the table, loosen the table tilt lock knob ( figure 52), tilt the work table to the desired angle, then retighten the lock knob. the work table should be set approximat...
Page 34 - Sanding Tips; Choosing Sandpaper
-32- model g1014z/g1014zX (mfg. 11/07+) Stock Inspection and Requirements some workpieces are not safe or may require modification before they are safe to sand. Before sanding, inspect all workpieces for the follow- ing: • Material Type: this machine is intended for only sanding natural and man-made...
Page 35 - Sanding
model g1014z/g1014zX (mfg. 11/07+) -33- horizontal & Edge Sanding if the sanding belt frame is in the vertical posi-tion, proceed to "setting up sander for horizontal and edge sanding" below to setup the sander for horizontal sanding. if the sander is already in the horizontal position, ...
Page 36 - Contour Sanding
-34- model g1014z/g1014zX (mfg. 11/07+) 4. While holding the back end of the workpiece against the backstop with both hands, and while keeping your fingers away from the belt, slowly feed the workpiece into the belt, as shown in figures 57 & 58. figure 57. sanding workpiece in horizontal positio...
Page 37 - Disc Sanding
model g1014z/g1014zX (mfg. 11/07+) -35- Disc Sanding To use the sanding disc: 1. disConneCt sander From poWer! 2. adjust the angles of the work table and the miter gauge for your operation. 3. Connect the sander to power, turn it ON, and allow it to reach full speed. 4. place the workpiece on the wo...
Page 38 - vertical Sanding
-36- model g1014z/g1014zX (mfg. 11/07+) vertical Sanding if the sanding belt frame is in the horizontal posi-tion, proceed to Setting up Sander for vertical Sanding. if the sander is already in the vertical position, skip to performing vertical Sanding on page 38. Setting up Sander for vertical Sand...
Page 40 - performing vertical Sanding
-38- model g1014z/g1014zX (mfg. 11/07+) —if the distance is not the same from side- to-side, loosen the screws that secure the work table arm to the work table. then adjust the table until the miter slot-belt distance is even side-to-side and the table is approximately 1 ⁄ 16 " away from the bel...
Page 42 - Tracking Belt
-40- model g1014z/g1014zX (mfg. 11/07+) Changing Sanding Disc the model g1014z/g1014zX accepts 9" diameter paper-backed pressure sensitive adhesive (psa) discs (refer to Accessories on page 41). To change the sanding disc: 1. disConneCt sander From poWer! 2. remove the work table and miter gauge...
Page 43 - SECTION 5: ACCESSORIES
model g1014z/g1014zX (mfg. 11/07+) -41- SECTION 5: ACCESSORIES aCCessories T20501—face Shield Crown protector 4"T20502—face Shield Crown protector 7"T20503—face Shield WindowT20448—Economy Clear Safety GlassesT20452—"Kirova" Anti-Reflective GlassesT20456—"Dakura" Clear Safety...
Page 45 - SECTION 6: MAINTENANCE; Schedule
model g1014z/g1014zX (mfg. 11/07+) -43- SECTION 6: MAINTENANCE Always disconnect power to the machine before performing maintenance. failure to do this may result in serious person- al injury. For optimum performance from your machine, follow this maintenance schedule and refer to any specific instr...
Page 47 - Troubleshooting
model g1014z/g1014zX (mfg. 11/07+) -45- review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-ops. if you need replacement parts or you are unsure of your repair skills, then feel free to call our technical support at (570) 546-9663. SECTION 7: SE...
Page 48 - Machine Operation
-46- model g1014z/g1014zX (mfg. 11/07+) symptom possible Cause possible solution Machine vibrates excessively. 1. sander not secured properly to stand (g1014z) or cabinet (g1014zX). 2. stand not stable on floor. 3. incorrect motor mounting.4. idler roller is too loose.5. Broken/defective sanding bel...
Page 49 - Replacement
model g1014z/g1014zX (mfg. 11/07+) -47- v-Belt Tension & Replacement the V-belt is pre-installed and tensioned at the factory. however, we recommend you verify this setting and also check the V-belt tension after the first 16 hours of operation, during which the belt will stretch and seat. Tools...
Page 52 - parallelism
-50- model g1014z/g1014zX (mfg. 11/07+) Miter Slot-Disc parallelism if the miter slot is not parallel with the disc, workpieces may not be sanded correctly when using the miter gauge. Tools Needed Qty Combination square ........................................... 1 To check and adjust the miter slot...
Page 53 - Wiring Safety Instructions
model g1014z/g1014zX (mfg. 11/07+) -51- these pages are current at the time of printing. however, in the spirit of improvement, we may make chang-es to the electrical systems of future machines. study this section carefully. if there are differences between your machine and what is shown in this sec...
Page 65 - WARRANTy AND RETuRNS
WARRANTy AND RETuRNS <g^ooan >cYjhig^Va! >cX# lVggVcih ZkZgn egdYjXi ^i hZaah [dg V eZg^dY d[ YEARidi]Zdg^\^cVaejgX]VhZg[gdb i]Z YViZ d[ ejgX]VhZ# I]^h lVggVcin YdZh cdi Veean id YZ[ZXih YjZ Y^gZXian dg ^cY^gZXian id b^hjhZ! VWjhZ!cZ\a^\ZcXZ!VXX^YZcih!gZeV^ghdgVaiZgVi^dchdgaVX`d[bV^ciZcVcXZ...
Page 68 - Buy Direct and Save with Grizzly; ORDER
Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! ~Since 1983~ ORDER 24 HOURS A DAY! 1-800-523-4777 Visit Our Website Today For Current Specials!
