Grizzly Industrial G1014Z - Manual
Grizzly Industrial G1014Z Grinding Machine – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Manual Insert
- Page 3 – NOTICE
- Page 6 – Table Of Contents
- Page 8 – Additional Safety Instructions For Sanders
- Page 9 – Grounding; SECTION 2: CIRCUIT REQUIREMENTS
- Page 10 – SECTION 3: GENERAL INFORMATION
- Page 11 – Unpacking; Piece Inventory
- Page 12 – Clean up; Site Considerations
- Page 15 – Sanding Unit
- Page 17 – Belt Replacement; SECTION 5: ADJUSTMENTS; Belt Tracking
- Page 18 – Belt Tensioning
- Page 19 – Vertical Positioning
- Page 20 – Changing Discs; Table tilt
- Page 21 – Horizontal Sanding; SECTION 6: OPERATIONS; Test Run
- Page 23 – SECTION 7: MAINTENANCE; Lubrication; General
- Page 25 – Machine Data
- Page 30 – WARRANTY AND RETURNS
COPYRIGHT © MARCH, 2008 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL10589 PRINTED IN TAIWAN
What Changed?
We have added a sleeve guard to the sander to
help reduce the risk of entanglement. The sleeve
guard MUST be installed on the idler roller guard
using the lock knobs and flat washers, as shown
in
Figure 1
.
Install the idler roller guard and sleeve guard onto
the idler roller after belt tension and tracking are
properly set, as described on G1014Z Manual
Pages 12 & 13
.
This update covers changes made to the machine after the owner's manual was printed. All page num-
ber references refer to the owner's manual for this machine. Keep this update with your owner's man-
ual for future reference.
If you have questions, contact Tech Support at (570) 546-9663 or by email at
MODEL G1014Z/G1014ZX
COMBINATION SANDER
MANUAL UPDATE
Figure 1
. Installing sleeve guard.
Machine Inventory
(See Page 6)
The following items have been added. Refer to
the full manual for a description of the main inven-
tory.
Box Contents
:
Qty
A.
Sleeve Guard ............................................ 1
B.
Lock Knobs ............................................... 2
C.
Flat Washers #10 ....................................... 2
New Sleeve Guard Parts
Idler Roller
Guard
Sleeve Guard
Lock Knob
#10 Flat
Washer
REF
PART #
DESCRIPTION
114A
P1014Z114A
IDLER ROLLER GUARD V2.03.08
114A-1 P1014Z114A-1 SLEEVE GUARD
126
P1014Z126
LOCK KNOB
127
PW03
FLAT WASHER #10
114A-1
127
126
127
126
114A
Figure 2
. New sleeve guard parts.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Grizzly Industrial G1014Z
Summary
Introduction The Model G1014ZX is the same sander as the Model G1014Z with the addition of the cabinet stand. Please use the included G1014Z manual for reference and for ordering parts that are not listed on the back of this insert. Assembly 1. Insert 5 ⁄ 16 -18 x 1" hex bolts into each of the r...
�� �� �� �� �� �� �� �� ��� ��� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� G1014ZX Replacement Parts NOTICE All parts for the Model G1014ZX, except those shown above, are the same as the Model G1014Z. Therefore, please use the included Model G1014Z manual when ordering new parts for your ...
G1014Z Combination Sander -1- Table Of Contents PAGE 1. SAFETY ....................................................................................................................2 SAFETY RULES FOR ALL TOOLS ....................................................................2 ADDITIONAL SAFETY INST...
