GAGGIA RI9601-01 - User Manual

6 English Table of Contents Machine Overview (Fig.2) ..........................................................................................................................................................................................................................................................

8 English Control Panel and Display This coffee machine features an easy-to-use, intuitive display. Please see below for an in-depth explanation of each button. Multifunction buttons Use the multifunction buttons at the sides of the display to select the feature or beverage indicated on the screen. ...

9 English First Installation Before using the machine, it is essential to follow a few simple steps, clearly described in the explanatory drawings found in the quick guide at the beginning of this instruction manual. Note: To make the best-tasting coffee, you should brew 5 coffees initially to allow...

10 English Measuring water hardness You’ll need to set the water hardness when you instal your machine. Take the water hardness measuring strip that you find in the box and follow the steps shown on the display during installation. To adjust the water hardness setting later, press the CLEAN/SETTING ...

11 English Installing the INTENZA+ water filter Remove the small white filter from the water tank and store it in a dry place. Immerse the INTENZA+ water filter vertically (with the opening pointing up) in cold water and gently press its sides to let any air bubbles out. Place the INTENZA+ filter in...

12 English Types of Beverage Beverage name Description Ristretto A ristretto, served in a small cup, is an espresso whose brewing time is shorter than a regular espresso. As such, a ristretto is a shorter shot and lower in caffeine. Espresso The espresso is known around the globe as true "Italia...

13 English Brewing coffee using pre-ground coffee Use the measuring scoop provided to insert the correct dose in the pre-ground coffee compartment. 1  Lift the lid of the pre-ground coffee compartment and add one level measuring scoop of pre-ground coffee. Warning: do not insert anything other than ...

14 English 3  Press the " " button. Note: the "pre-ground coffee" function cannot dispense two cups of coffee at the same time, and it disables the aroma setting, both of which are possible with coffee beans only. 4  Press the START/STOP START/STOP button to start dispensing the coff...

15 English Dispensing Hot Water Warning: when the machine starts preparing hot water, the Pannarello spout may spray steam and hot water. 1 Place a container under the Classic Pannarello. 2 Press the HOME HOME button. 3 Press the "HOT WATER" button. Finally, press the START/STOP START/STOP b...

17 English 3 Press the " ADD DRINK " button. 4 The beverage screens will be displayed. Select the beverage that you want to save to your profile and customise it by following steps 3 to 8 in the "Beverage customisation" chapter. Creating a profile There are two ways to create a profi...

18 English Coffee Grind Settings You can adjust the grind setting using the grinder adjustment knob on the coffee bean container. The ceramic coffee grinder guarantees perfect, even grinding for the preparation of every cup of coffee. The aroma is thus preserved, ensuring the perfect flavour every t...

20 English Cleaning the Classic Pannarello 1 Remove the Classic Pannarello and the rubber handle from the steam spout and rinse them under running water. 2 Clean the steam wand with a damp cloth. 3 Reassemble the parts. Cleaning the brew group Warning: do not wash the brew group in the dishwasher an...

21 English Cleaning the brew group under running water 1 Clean the coffee outlet duct thoroughly with a spoon handle or with another round-tipped kitchen utensil. 2 Thoroughly rinse the brew group using lukewarm water. Carefully wash the upper filter. 3 Let the brew group air dry. Note: to avoid the...

22 English Reinserting the brew group 1 Before reinserting the brew group into the machine, ensure that the two yellow reference indicators on the side coincide. If this is not the case, perform the following step: Make sure that the lever is in contact with the base of the brew group. 2 Make sure t...

23 English Lubricating the brew group In order to ensure the perfect performance of the machine, it is necessary to lubricate the brew group. Refer to the following table for the frequency of lubrication. Frequency of use Number of beverages prepared daily Frequency of lubrication Low 1-5 Every 4 mo...

24 English Descaling Descaling procedure Descaling needs to be carried out when the machine signals it.Use only the Gaggia descaling solution designed to guarantee the machine’s excellent performance. The use of other products could damage the machine and leave residue in the water. Failure to desca...

25 English What to do if the descaling process is interrupted You can exit the descaling procedure by pressing the ON/OFF ON/OFF button on the control panel. If the descaling procedure is interrupted before its completion, proceed as follows: 1 Empty the water tank and wash it thoroughly. 2 Fill the...

26 English Timer stand-by When " TIMER STAND-BY " is selected, the timer can be set to: - 15 min - 30 min - 60 min - 180 min START/STOP ON/OFF my favourites HOME clean/setting LANGUAGE TIMER STAND-BY WATER FILTER UNITS START/STOP ON/OFF my favourites HOME clean/setting LANGUAGE TIMER STAND-B...

27 English Error Code Key The list below reports the error codes that the display can show, their meanings and how to solve the problem. If the indicated solutions are ineffective because the display keeps showing the error code icon and the machine does not function correctly, or if further error c...

28 English Troubleshooting This chapter summarises the most common problems you may encounter while using the machine. If you are unable to resolve the problem using the information given below, visit the FAQ sections on www.gaggia.com or www.gaggia.it or contact the Customer Service Centre in your ...

30 English Problem Cause Solution The "INTENZA+" filter cannot be inserted. Remove the air from the filter. Let the air bubbles flow out of the filter. The tank still contains some water. Empty the water tank before installing the filter. The rubber seal is not inserted on the "INTENZA+&...

31 English Technical Specifications Nominal voltage - Power rating - Power supply See data plate on the inside of the service door Housing material Thermoplastic type Dimensions (Style) 260 x 345 x 440 mm Dimensions (Plus) 260 x 380 x 440 mm Weight (Style) 8.2 kg Weight (Plus) 9 kg Power cord length...

32 Nederlands Inhoudsopgave Overzicht van de machine (afb. 2) .................................................................................................................................................................................................................................................