SIIG CEMT0A12S1 - Manuals

1 2 3 4 Figure 1 Figure 2 1 2 3 Step 1: Wall Plate Installation Hold the wall plate (Figure 2) to the wall, use the two mounting holes to mark thelocations to be used for mounting the wall plate. Locate the holes directly into thebrick, block or concrete, never into the mortar between the blocks.Pre...

1 2 Figure 3 1 2 3 Figure 4 Phillips screw driver Figure 5 Figure 6 Figure 7 Step 3: Final Installation Step 2: Display Plate Installation Hang the display plate onto the top of thewall plate and slip it into the wall plate asshown (Figure 4).Tighten the safety screw on the side andback using a Phil...

Important: If you don't understand the installation instructions, please consult an installation specialist. Maintenance Check the mounting screws every two months for tightness. Page 4