SIIG 04-0755A - Manual
SIIG 04-0755A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Layout; Figure 1: Front Panel Layout
- Page 3 – Figure 2 Rear Panel Layout
- Page 4 – IR Remote Control; Figure 3: IR Remote Control; for Output 1
- Page 5 – Hardware Installation
- Page 6 – Operation; Use the front panel push buttons or the IR Remote; Front Panel Push Button Selection; IR Remote Control Selection; See descriptions and instructions on page 2.
- Page 7 – Technical Support and Warranty
1
4x2 HDMI Matrix Switch
w i t h 3 D T V S u p p o r t
Quick Installation Guide
04-0755A
Introduction
The
4x2 HDMI Matrix Switch with 3DTV Support
allows any four HDMI sources to be displayed on
any two displays and routes high definition video
in multiple resolutions up to 1080p plus multi-
channel audio.
Key Features and Benefits
•
HDMI and HDCP compliant
•
Support 1080p with 3DTV support
•
Support standard, DSD and HD (HBR)
audio
Package Contents
•
4x2 HDMI Matrix Switch with 3DTV
support
•
Power adapter
•
IR remote control & 4 rubber pads
•
Quick installation guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Layout Figure 1: Front Panel Layout • Select 1: Select input source 1, 2, 3 or 4 with Output 1 or press for 3 seconds to turn off Output 1 • Select 2: Select input source 1, 2, 3 or 4 with Output 2 or press for 3 seconds to turn off Output 2 • Output 1 LED: Shows which input source is selected for...
3 USB port Power jack HDMI Out 1 HDMI Out 2 HDMI In HDMI In 2 HDMI In 3 HDMI In 4 S/PDIF Out Figure 2 Rear Panel Layout • USB port: For firmware update only • Power jack: Connects to the included power adapter • HDMI Output (1-2): Connects to your HDMI displays via HDMI cables (cables not included) ...
4 IR Remote Control Output 2 select Output 1 select Power Figure 3: IR Remote Control • Output 1 select: Select HDMI input 1, 2, 3 or 4 for Output 1 • Output 2 select: Select HDMI input 1, 2, 3 or 4 for Output 2 • Power: Press the button to power on/off the switch
