SIIG SATA II-150 - Manuals - manualsarea.com

Page 2 - Hardware Installation

2 Package Contents • SATA II-150 PCI RAID board • 2 SATA data cables and one dual-connector SATA power cable • Spare low profile bracket • Driver CD and Quick Installation Guide Layout Figure 1. SATA II-150 PCI RAID Hardware Installation General instructions for installing the card are provided belo...

Page 3 - Hard Disk Drive Connection; SATA II-150 PCI RAID; RAID Arrays; RAID

3 1. Turn OFF the power to your computer and any other connected peripheral devices. 2. Unplug the power cord from the back of the computer, remove the cover. 3. Remove the slot bracket from an available PCI slot. 4. To install the card, carefully align the card's bus connector with the selected PCI...

Page 6 - Deleting RAID Arrays

6 6. When asked, All data in selected drive will lost! Continue (Yes/No)? , select Yes , then press Enter . 7. Select RAID , then select Rebuild . 8. Press Enter . The mirror will begin rebuilding. Do not interfere with the process. 9. When rebuilding is finished, select Exit , then press Enter 10. ...

Page 7 - Low Level Format; BIOS Configuration; Driver Installation; contents

7 Low Level Format Low Level Format is built into the RAID BIOS to make it more convenient to erase the entire contents of a hard disk drive, including data, drive and partition information. The Low Level Format utility works on single hard drives only, before the RAID set is configured. BIOS Config...

Page 10 - Windows VistaTM

10 2. At the Found New Hardware Wizard : XP (w/SP1 or earlier)/Server 2003 : continue to step #3 XP (w/SP2 or later)/Server 2003 (w/ SP1 or later) : select No, not at this time , then click Next . 3. Insert the driver CD, select Install the software automatically (Recommended) , and click Next . 4. ...

Page 12 - To Verify Windows Installation

12 4. Click Install this driver software anyway , then click Close . 5. Restart Windows to complete the installation. When Windows resumes, go to Initio SATA RAID Manager GUI on page 13 and install the RAID utility. To Verify Windows Installation For Windows 2000/XP/Server 20031. Right click My Comp...

Page 13 - Initio SATA RAID Manager GUI; Windows Vista /Server 2008 Installation

13 Initio SATA RAID Manager GUI The Initio SATA RAID Manager GUI provides the user an easy way to monitor your RAID set. Windows 2000/XP/Server 2003 Installation 1. Place the driver CD into the CD-ROM drive. 2. At the Windows desktop click Start , then Run . 3. Type D:\Gui\Setup.exe , then click OK ...

Page 14 - Blank Page

Page 15 - Technical Support and Warranty; O n l i n e S u p p o r t

15 Technical Support and Warranty Q U E S T I O N S ? S I I G ’ s O n l i n e S u p p o r t h a s a n s w e r s ! Simply visit our website at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few...