SIIG 04-0629A - Manual
SIIG 04-0629A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – port cable
- Page 3 – Hardware Installation; Figure 1
- Page 4 – Driver Installation
- Page 8 – Windows ME
- Page 9 – To Verify Windows Installation
- Page 10 – DOS
- Page 11 – Technical Support and Warranty; Online Support
1
2S1P Combo-Value
Quick Installation Guide
0 4 - 0 6 2 9 A
Introducing the
2S1P Combo-Value
The
2S1P Combo-Value
is a total solution for serial and
parallel device connections. It provides two 16550 UART
serial ports which supports data transfer rates up to
16 Mb/s and one ECP/EPP parallel port which supports
data transfer rates up to 1.5 MB/s.
Features and Benefits
•
Compliant with PCI Local Bus Specification, Revision
2.3
•
Full support for DOS- and Windows-based software
•
PCI IRQ sharing feature reduces IRQ conflicts
Serial interface
•
Two high-speed 16C550 UART serial ports (9-pin)
supports baud rate up to 16 Mb/s
•
Works with 56K modems, PDAs, and other high
speed serial devices
Parallel interface
•
Compliant with IEEE 1284-1994 parallel port
standard
•
Supports ECP, EPP, PS2, and SPP parallel port
modes
•
Works with various types of parallel devices
including printers, removable drives, scanners,
CD-R/RWs, and more
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 System Requirements • Pentium ® or equivalent computer with an available PCI slot • Windows ® 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000 / ME / 98SE / 98 / 95, DOS Package Contents • 2S1P Combo-Value board • 2-Port DB9 (9-pin) serial port cab...
3 Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed.Static Electricity Discharge may permanently damage your system. Discharge a...
4 Driver Installation This section provides information on how to install the 2S1P Combo-Value drivers. Please make sure the board is installed before proceeding. Windows 7 (32-/64-bit) 1. Install the board and boot up Windows. 2. Right click Computer , click Manage , click Device Manager . 3. Inser...
