SIIG 04-0528C - Manuals

A G B H C I D J E K F L M (×4) M8 Spacer (×4) M8×35 screw (×4) M4×12 screw When mounting to a wall that contains wood studs, confirm dead center of the wood stud prior to installation, it isrecommended that the wood studs be a minimum of 16" apart. (×6) M8 concrete anchor (×4) M4×35 screw (×6) M...

1234 a) Wood Stud Installation 3 4 5 6 7 8 CAUTION: Do not over-tighten bolts-doing so many cause unnecessary damage to the wall. Avoid excessive torque. Mark the right (upper and lower) and the left (upper and lower) positionsof the small horizontal slots that are in alignment with the studs (figur...

NOTE: 1 2 3 4 5 6 7 8 5 6 1 2 If your display has a curved back or a recessed thread mounting point, a spacer (M) must be used. Then choose screw(F/G/H) to match.Place the spacer (M) between the mounting bracket and display. Next, drill holes using an electric drill and 5/16" masonry bit to a de...