SIIG 04-0207A - Manual
SIIG 04-0207A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; Hardware Installation; Remove your computer’s cover and install the card in an; Software Installation; Insert the Driver Installation diskette in the floppy drive, and
- Page 3 – the setup to take effect.; At the Add New Hardware Wizard screen, choose Specify the
- Page 6 – Troubleshooting; Driver Update
- Page 7 – Technical Support; Online Support; Step 2: Complete the RMA form
- Page 8 – FCC COMPLIANCE STATEMENT:
1
Low Profile PCI-1S1P
Quick Installation Guide
04-0207A
Introducing the Low Profile PCI -1S1P
The Low Profile PCI -1S1P conforms to the new PCI card form factor
standard made for space constrained system designs.
Features and Benefits
•
Conforms to PCI v2.2 Plug and Play
•
Full support for DOS- and Windows-based software
•
IRQ sharing feature eliminates IRQ conflicts
Serial interface:
•
High-speed 16550 UART serial port (9-pin) supports baud rates
up to 920Kbps. Works with various types of serial devices
•
Built-in 16-byte FIFO buffers dramatically increase data transmit/
receive speed
Parallel interface:
•
Conforms to IEEE 1284-1994 parallel port standard
•
High-speed parallel port supports various types of parallel port
devices
•
Supports EPP, ECP(PIO mode), Bi-directional Parallel Port (BPP)
and Standard Parallel Port (SPP) modes
Dimensions:
• PCB: 119.91 mm (L) x 64.41 mm (H)
• Bracket: 18.42 mm (W) x 79.20 mm (H)
System Requirements
•
Pentium or equivalent computer with an available 32-bit PCI slot
•
DOS/Windows 3.1x, Windows 95/98/98 SE/ME/NT 4.0/2000
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • One Low Profile PCI -1S1P board• One Driver Installation diskette• One 5-year warranty card• This quick installation guide Hardware Installation General instructions for installing the card are provided below,since the design of computer cases and motherboards vary. Referto your...
3 3. From the Insert Disk window, click OK. When the Copying Files dialog box appears, type in a:\Win95, then click OK. 4. Remove the diskette and select Yes to restart the computer for the setup to take effect. Windows 98/98 SE: 1. At the Add New Hardware Wizard windows, click Next.2. Select Search...
6 Troubleshooting Problem: I am installing a parallel port(s) and my system freezes up when Windows tries to install the driver for my printer port.Solution: Enter your system bios, set the onboard parallel port I/O address to 278h, save and exit. In certain systems, the address 278his reserved for ...
