SIIG 04-0621A - Manual
SIIG 04-0621A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Caution; INSTALLATION AND OPERATING INSTRUCTIONS
- Page 3 – a) Wood Stud Installation; Phillips head screw driver; CAUTION; Step1: Wall Plate Installation; Stud finder for drywall installation
- Page 4 – Step 2 Display Plate Installation
- Page 5 – Swivel Adjustment; Maintenance; Check the mounting screws every two months for tightness.; Step 3 Final Installation & Adjustment; Tighten the middle screw to secure the tilt angle (Figure 7).
- Page 6 – Blank Page
- Page 7 – Technical Support and Warranty
- Page 8 – PRODUCT NAME
04-0621A
Max load capacity:100 lbs
Tilt angle: 0-12 degrees
Installation and Operating Instructions
Wall distance: 3.75" / 95mm
Built-in bubble level
Universal Mounting Pattern
Full Motion TV Mount - 23" to 42"
IMPORTANT
: If you have difficulty following or understanding these installation instructions,
please consult a qualified service technician.
Full-motion/articulating universal LCD/Plasma TV wall-mount
TV size: 23" - 42"
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
A G B H C I D J E K F L M (x2) cable ties (30cm) Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the display and/or damage to the mounting surface. Recommended mounting surfaces: wood stud and solid-flat concrete. If ...
1 2 3 4 a) Wood Stud Installation 3 4 5 Figure 1 6 7 8 Phillips head screw driver Place the wall plate against the wall and line up the mounting slots with the drilled holes. Check the bubble level to verify that the wall plate is level. CAUTION : Do not release the wall plate until it is properly m...
1 2 3 4 5 6 7 Figure 2 1 2 3 4 Figure 3 Figure 4 Figure 4-1 Place your TV screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display (Figure 3). Note: The concrete anchors must be used for concrete and brick installation. Determine which ...
