SIIG 04-0832A - Manual
SIIG 04-0832A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – System Requirements; Desktop or notebook PC with an available; Package Contents; Power adapter; Layout
- Page 4 – Hard ware Installation; Important; Ethernet and 5V/4A Adapter; Upstream; Switching power adapter; cable
- Page 5 – Driver Installation
- Page 7 – To Verify Successful Installation; For Windows Vista
- Page 8 – Mac OS Installation
- Page 9 – To Verify MAC OS Installation; Go to
- Page 10 – Uninstall the Driver on MAC OS; Drivers
- Page 11 – Technical Support and Warranty
1
04-0832A
Introduction
The
USB 3.0 & 2.0 Hub with Gigabit Ethernet and
5V/4A Adapter
provides 6 additional USB 3.0 &
2.0 ports and a Gigabit Ethernet port to your PC
or MAC system.
Key Features and Benefits
•
Provides 2 USB 3.0, 4 USB 2.0 ports and a
Gigabit 10/100/1000Mb/s Ethernet port
•
Compliant with Universal Serial Bus 3.0
Specification & IEEE 802.3, 802.3u, and
802.3ab compatible
•
Supports SuperSpeed USB 3.0 data transfer
rate up to 5Gb/s and backward compatible
with USB 2.0 & USB 1.1 devices
•
5V/4A adapter for power hungry USB
devices
USB 3.0 & 2.0 Hub with
Gigabit Ethernet and 5V/
4A Adapter
Quick Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 System Requirements • Desktop or notebook PC with an available USB port (USB 3.0 recommended) • Windows ® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2008 & 2003 (32-/64-bit) / Server 2008 R2 • MAC OS 10.6.x or later Package Contents • USB 3.0 & 2.0 Hub ...
4 Hard ware Installation Important : The USB 3.0 & 2.0 Hub with Gigabit Ethernet and 5V/4A Adapter only works at USB 3.0 speed when connected to a USB 3.0 host controller. Otherwise it will work as a USB 2.0 or USB 1.1 hub when connected to USB 2.0 or USB 1.1 host controller, respectively.1 . Co...
5 Driver Installation Please don't connect the hub to the computer before the driver is installed. Windows 8 (32-/64-bit) 1 . Insert the driver CD. 2 . Press Windows key and R , type D:\Win 8\setup.exe in the Run window, then click OK . (Change D: to match your CD\DVD- ROM drive letter) 3 . At the U...
