SIIG 04-0399B - Manual
SIIG 04-0399B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Layout; Installation
- Page 5 – Windows Installation
- Page 6 – Windows Vista
- Page 7 – Windows Device Switching; Hotkey Control
- Page 8 – Manual Switching
- Page 9 – Mac OS Installation; USB; Mac OS Device Switching; switching buttons; Memory Card Readers; Trashcan; Mass Storage Devices
- Page 10 – Other Devices; Connecting USB Devices
- Page 11 – Technical Support and Warranty
1
04-0399B
USB 2.0 Switch
Quick Installation Guide
Introducing the USB 2.0 Switch
The
USB 2.0 Switch
is designed to share USB device(s)
between multiple systems.
Features and Benefits
•
Compliant with USB Specifications, Revision 2.0.
Hot-swapping feature allows you to attach/
detach USB devices without powering down
your computer
•
Use keyboard Hotkey control (PC only) or
Power LED/Manual Switching Button to switch
between computers
•
Designed for USB devices including printers,
scanners, hard disk drives, cameras, CD-ROMS
and Zip drives
Note
: Not designed to work with keyboard or
mouse.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 System Requirements • PC or Mac computer with an available USB port (USB 2.0 recommended) • Windows ® 98SE/ME/2000/XP (32-/64-bit)/ Server 2003 (32-/64-bit)/Vista (32-/64-bit) • Mac OS X v10.0 or later Package Contents • USB 2.0 Switch • USB cables (6 Ft, Type A to Type B) • Driver CD • Quick inst...
5 Windows Installation Important: Do not connect the USB 2.0 Switch to your system until after the driver has been installed. In order for the driver to install properly the Power LED to that system must be switched to another system. For example, if you connect port A to system A, make sure the Pow...
6 Note: If prompted for Windows Installation CD-ROM , click OK . Insert this CD and click OK . Windows ME/2000/XP/Server 2003 1. Insert the driver CD after Windows boots. 2. AutoRun should start the installation. If AutoRun doesn't start, click Start , Run , type D:\setup.exe , then click OK . (Chan...
