SIIG 04-0399B - Manuals - manualsarea.com

Page 2 - Layout; Installation

2 System Requirements • PC or Mac computer with an available USB port (USB 2.0 recommended) • Windows ® 98SE/ME/2000/XP (32-/64-bit)/ Server 2003 (32-/64-bit)/Vista (32-/64-bit) • Mac OS X v10.0 or later Package Contents • USB 2.0 Switch • USB cables (6 Ft, Type A to Type B) • Driver CD • Quick inst...

Page 5 - Windows Installation

5 Windows Installation Important: Do not connect the USB 2.0 Switch to your system until after the driver has been installed. In order for the driver to install properly the Power LED to that system must be switched to another system. For example, if you connect port A to system A, make sure the Pow...

Page 6 - Windows Vista

6 Note: If prompted for Windows Installation CD-ROM , click OK . Insert this CD and click OK . Windows ME/2000/XP/Server 2003 1. Insert the driver CD after Windows boots. 2. AutoRun should start the installation. If AutoRun doesn't start, click Start , Run , type D:\setup.exe , then click OK . (Chan...

Page 7 - Windows Device Switching; Hotkey Control

7 Windows Device Switching Hotkey Control , Status Indicator and Manual Switching buttons are the three methods that can be used to switch devices between systems. Note: For Mass Storage devices such as Zip drives, USB readers and CD-ROMs, before switching the USB device to another system, it must b...

Page 8 - Manual Switching

8 2. Double click the USB Sharing icon to start USB sharing program manually. 3. Right click the Status Indicator and select Switch can also switch USB access to the current system. Note: Devices such as external hard drives and printers send signals back and forth to your computer when they are con...

Page 9 - Mac OS Installation; USB; Mac OS Device Switching; switching buttons; Memory Card Readers; Trashcan; Mass Storage Devices

9 Mac OS Installation No driver installation is necessary. Simply plug the USB 2 . 0 S w i t c h i n t o a n a v a i l a b l e U S B p o r t ( U S B 2 . 0 recommended). Mac OS Device Switching Device switching is controlled by the Power LED/Manual switching buttons . Follow the instructions below fo...

Page 10 - Other Devices; Connecting USB Devices

1 0 1. Drag the drive icon into the Trashcan . 2. Press the switching button to change systems. 3. The drive icon will appear on the other system. Other Devices For other devices just press the switching button to change to another system. Connecting USB Devices When connecting your USB device(s) to...

Page 11 - Technical Support and Warranty

1 1 Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit...