SIIG 2S - Manuals - manualsarea.com

Page 2 - Package Contents; CyberPro PCI 2S; Layout

2 Package Contents • CyberPro PCI 2S board • 2-port fan-out cable • Low profile bracket (Dual Profile board only) • Driver CD • Quick installation guide Layout Figure 1. Layout * Note: Depending on the model purchased, the bracket size will be either Full or Low profile. Jumper Settings (JP1, JP2) O...

Page 3 - Hardware Installation

3 Fan-out Cable 25-pin connector 9-pin serial 9-pin serial Figure 2. Fan-out cable Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if ne...

Page 4 - Driver Installation; CyberPro PCI

4 5. Set JP1 and JP2 jumper settings to the desired voltage only if your serial device needs additional power from the serial port. However, most serial devices do not require additional power. For more information see Figure 1 on page 2 . The jumpers can be removed if power is not required. 6. To i...

Page 5 - Windows ME

5 Windows 98/98SE 1. At the Add New Hardware Wizard , click Next . 2. Select Search for the best driver for your device (Recommend) , then click Next . 3. Insert the driver CD, check Specify a location , uncheck the other boxes, type in D:\9x, then click Next . (Change D: to match your CD-ROM drive ...

Page 6 - To Verify Windows NT 4.0 Installation

6 3. Double click Multi-function adapters, SIIG CyberPro 2S PCI board and PCI Function should be displayed. Windows NT 4.0 1. From the desktop click Start, then Run . 2. Insert the driver CD, type in D:\NT4\Install_serial.exe, then click OK . (Change D: to match your CD-ROM drive letter) 3. Click Ne...

Page 9 - Changing COM Port Address

9 Changing COM Port Address Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. Windows 95/98/98SE/ME 1. From the Device Manager window double click Ports (COM & LPT) , then double click the CyberSerial PCI serial port ...

Page 10 - Blank Page

Page 11 - Technical Support and Warranty; Online Support

11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit ...

Page 12 - networking, sound cards, and other accessories. SIIG is the premier

CyberPro PCI 2S is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in this publication are for id...