SIIG 1X4 HDMI 1.3 CAT5E - Manuals

2 Layout Figure 1: Back Layout • +5V DC : Power adapter jack for the included 5V power adapter • HDMI Input : Connect HDMI source here • USB : For firmware update use only • DIP Switch : EDID & audio information (see the table on the next page) • HDMI Out 1–4 : HDMI signal output 1-4 to link to ...

3 1 If the HDTV shows video without audio, set audio mode to stereo 2 Factory default setting is Pin#1 - OFF, Pin #2 OFF, for 1080p with stereo 3 If you encounter unsolved audio/video output problem during system installation, please set the DIP switch to Pin #1 - OFF, Pin #2 - ON to enforce 720p wi...

4 Hardware Installation Broadcasts HDMI signals to up to 4 remote displays.1. Switch off all devices, including display(s). 2. Connect your HDMI source (such as a Blu-ray Disc player) to the HDMI Input of the 1x4 HDMI 1.3 CAT5e Distribution Amplifier . 3. Connect the 1x4 HDMI 1.3 CAT5e Distribution ...