SIIG 1X4 HDMI 1.3 CAT5E - Manual
SIIG 1X4 HDMI 1.3 CAT5E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Layout; Figure 1: Back Layout; CAT5e Distribution Amplifier
- Page 3 – Dip Switch
- Page 4 – Hardware Installation; Notes
- Page 6 – Blank Page
- Page 7 – Technical Support and Warranty; Online Support
- Page 8 – FCC COMPLIANCE STATEMENT:
1
1 x 4 H D M I 1 . 3 C A T 5 e
D i s t r i b u t i o n A m p l i f i e r
Quick Installation Guide
0 4 - 0 5 9 5 A
Introducing the 1x4 HDMI CAT5e Distribution
Amplifier
The
1x4 HDMI 1.3 CAT5e Distribution Amplifier
provides
the most flexible solution by which the high definition
video and high quality audio can be transmitted to
different locations over a long distance.
Features and Benefits
•
HDMI 1.3c and HDCP compliant
•
Chipset: Silicon Image
•
Video bandwidth: 6.75 Gbps
•
Input TMDS signal: 1.2V (peak-to-peak)
•
Input DDC signal: 5V (peak-to-peak)
•
Resolution: 480i / 480p / 720p / 1080i / 1080p
(60Hz)
•
Input: 1x HDMI (female, 19-pin)
•
Output: 4x RJ-45
Package Contents
•
1x4 HDMI 1.3 CAT5e Distribution Amplifier
•
Power adapter (5V)
•
Screw kit
•
Quick installation guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Layout Figure 1: Back Layout • +5V DC : Power adapter jack for the included 5V power adapter • HDMI Input : Connect HDMI source here • USB : For firmware update use only • DIP Switch : EDID & audio information (see the table on the next page) • HDMI Out 1–4 : HDMI signal output 1-4 to link to ...
3 1 If the HDTV shows video without audio, set audio mode to stereo 2 Factory default setting is Pin#1 - OFF, Pin #2 OFF, for 1080p with stereo 3 If you encounter unsolved audio/video output problem during system installation, please set the DIP switch to Pin #1 - OFF, Pin #2 - ON to enforce 720p wi...
4 Hardware Installation Broadcasts HDMI signals to up to 4 remote displays.1. Switch off all devices, including display(s). 2. Connect your HDMI source (such as a Blu-ray Disc player) to the HDMI Input of the 1x4 HDMI 1.3 CAT5e Distribution Amplifier . 3. Connect the 1x4 HDMI 1.3 CAT5e Distribution ...
