SIIG 1S1P PCI - Manuals - manualsarea.com

Page 2 - Note: Most serial devices do not require additional; power through the serial port. Refer to your serial

2 Package Contents • (1) Cyber 1S1P PCI board • (1) Driver CD • (1) Quick Installation Guide Layout Figure 1. Layout Jumper Settings (JP1) Open = 0 volts (default)Short 1-2 = 5vShort 2-3 = 12v Note: Most serial devices do not require additional power through the serial port. Refer to your serial dev...

Page 3 - Hardware Installation

3 Hardware Installation General instructions for installing the card are provided below, since the design of computer cases and motherboards vary. Refer to your computer’s reference manual for further information, if needed.Static Electricity Discharge may permanently damage your system. Discharge a...

Page 4 - Software Installation; Cyber 1S1P PCI drivers.; Windows 95 Driver Installation; Copying Files dialog box appears, type in; Windows 98/98SE Driver Installation

4 Software Installation This section provides information on how to install the Cyber 1S1P PCI drivers. Windows 95 Driver Installation 1. At the Update Device Driver Wizard window, click Next. 2. Insert the driver CD, and click Other Locations. Type in D:\9x, click OK, then Finish. (Change D: to mat...

Page 5 - Windows ME Driver Installation; To Verify Successful Installation In Windows 95/98/; CyberPro 1S1P PCI board should be displayed.; Windows NT 4.0 Driver Installation

5 Windows ME Driver Installation 1. At the Add New Hardware Wizard, choose Specify the location of the driver (Advanced), then click Next. 2. Check Specify a location, uncheck the other box, insert the driver CD, type in D:\Me, then click Next. (Change D: to match your CD-ROM drive letter) 3. Click ...

Page 6 - Windows 2000 Driver Installation

6 7. Type in D:\NT4\Install_Parallel.exe, then click OK. (Change D: to match your CD-ROM drive letter) 8. Repeat steps 3-5. 9. Click Yes to restart Windows to complete the installation. To Verify Successful Installation In Windows NT 4.0:1. Go to Start / Settings / Control Panel, double click Ports ...

Page 7 - Windows Server 2003 Driver Installation; tested for stability and compatibility.

7 2. Insert the driver CD, check Include this location in the search, uncheck the other check box, type in D:\XP, and click Next. (Change D: to match your CD-ROM drive letter) 3. At the Hardware Installation window, click Continue Anyway, then Finish. Our driver has been tested for stability and com...

Page 8 - Changing COM Port Address

8 Changing COM Port Address Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. Windows 95/98/98SE/ME 1. From the Device Manager window double click Ports (COM & LPT), then double click CyberSerial PCI... serial port. 2...

Page 10 - Blank Page

Page 11 - Technical Support; QUESTIONS? SIIG’s Online Support has the answers!; Online Store; SIIG offers all of our products online at our company

11 Technical Support QUESTIONS? SIIG’s Online Support has the answers! Simply visit our Web site at www.siig.com and click on Support. Our online support database is updated daily with new drivers and solutions. The answers to your problems could be just a few clicks away.If you can't find answers o...