SIIG 1S1P PCI - Manual
SIIG 1S1P PCI – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Note: Most serial devices do not require additional; power through the serial port. Refer to your serial
- Page 3 – Hardware Installation
- Page 4 – Software Installation; Cyber 1S1P PCI drivers.; Windows 95 Driver Installation; Copying Files dialog box appears, type in; Windows 98/98SE Driver Installation
- Page 5 – Windows ME Driver Installation; To Verify Successful Installation In Windows 95/98/; CyberPro 1S1P PCI board should be displayed.; Windows NT 4.0 Driver Installation
- Page 6 – Windows 2000 Driver Installation
- Page 7 – Windows Server 2003 Driver Installation; tested for stability and compatibility.
- Page 8 – Changing COM Port Address
- Page 10 – Blank Page
- Page 11 – Technical Support; QUESTIONS? SIIG’s Online Support has the answers!; Online Store; SIIG offers all of our products online at our company
1
Cyber 1S1P PCI
Quick Installation Guide
0 4 - 0 3 4 4 A
Introducing the Cyber 1S1P PCI
The Cyber 1S1P PCI high-speed serial I/O card provides
one 9-pin serial port and one parallel port.
Features and Benefits
•
Conforms to PCI v2.2 Plug and Play
•
Full support for Windows-based software
•
R e d u c e s C P U l o a d a n d i m p r o v e s s y s t e m
performance dramatically
•
IRQ sharing feature reduces IRQ conflicts
•
High-speed serial port (9-pin) works with 56K V.90
external modems, ISDN terminal adapters, PDAs,
digital cameras, label printers and other serial port
devices
•
Built-in FIFO buffers dramatically increase data
transmit/receive speed, especially under Windows'
multitasking environment
•
Each serial port can be configured for either 5v or
12v output, for serial devices that require power
•
IEEE 1284 compliant SPP/EPP/ECP parallel port
System Requirements
•
Pentium or equivalent computer with an available
PCI slot
•
Windows 95/98/98SE/ME/NT 4.0/2000/XP/
Server 2003
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • (1) Cyber 1S1P PCI board • (1) Driver CD • (1) Quick Installation Guide Layout Figure 1. Layout Jumper Settings (JP1) Open = 0 volts (default)Short 1-2 = 5vShort 2-3 = 12v Note: Most serial devices do not require additional power through the serial port. Refer to your serial dev...
3 Hardware Installation General instructions for installing the card are provided below, since the design of computer cases and motherboards vary. Refer to your computer’s reference manual for further information, if needed.Static Electricity Discharge may permanently damage your system. Discharge a...
4 Software Installation This section provides information on how to install the Cyber 1S1P PCI drivers. Windows 95 Driver Installation 1. At the Update Device Driver Wizard window, click Next. 2. Insert the driver CD, and click Other Locations. Type in D:\9x, click OK, then Finish. (Change D: to mat...
