SIIG 104-0487A - Manuals - manualsarea.com

Page 2 - Package Contents; eSATA II 2-Port ExpressCard; Layout; Hardware Installation

2 Package Contents • eSATA II 2-Port ExpressCard • Driver CD • Quick Installation Guide Layout eSATAconnectors Figure 1: eSATA II 2-port ExpressCard Hardware Installation General instructions for installing the ExpresscCard areprovided. Since the design of systems may vary, refer toyour system refer...

Page 3 - Windows Driver Installation; this time

3 Windows Driver Installation This section provides instructions to install the eSATA II2-Port ExpressCard drivers. Windows 2000 1. Install the ExpressCard into an ExpressCard slot. 2. At the Found New Hardware Wizard, click Next. 3. Select Search for a suitable driver for my device (recommended) an...

Page 4 - Windows Vista; and install driver software (recommended); To Verify Windows Installation

4 3. Insert the driver CD, select Install the software automatically (Recommended) , click Next, then click Next again. 4. Click Finish then restart Windows to complete the driver installation. Windows Vista TM (32-/64-bit) 1. Install the ExpressCard into an ExpressCard slot. 2. At the Found New Har...

Page 5 - For Windows Vista: Right click Computer, click; Manage; For Windows Server 2008: Right click Computer and; Double click either SCSI and RAID controllers or; should be displayed.; Windows Device Connection; External Devices; Right click My Computer and click Manage. (For

5 For Windows Vista: Right click Computer, click Manage , click Continue. Click Device Manager. For Windows Server 2008: Right click Computer and click Manage. Double click Diagnostics, clickDevice Manager . 2. Double click either SCSI and RAID controllers or Storage controllers , and Silicon Image ...

Page 6 - You can now unplug the hard disk.; Note; Assigning a Drive Letter in Windows; Right click My Computer, click Manage, click Disk

6 4. You can now unplug the hard disk. Note : When reconnecting a Disabled hard disk, it must be enabled, otherwise, it will not workproperly in Windows. To enable the hard disk,follow steps 1-3. At step #3, select Enable. Assigning a Drive Letter in Windows Windows may not assign a drive letter to ...

Page 7 - Right click on the Healthy disk, that does not have; At Change Drive Letters and Paths box, click Add.

7 2. Right click on the Healthy disk, that does not have a drive letter, then click on Change Drive Letter andPaths . See Figure 3 below. Figure 3 3. At Change Drive Letters and Paths box, click Add. Figure 4

Page 8 - , choose an available drive; letter from the drop down box, then click OK.; A drive letter should be assigned to the Healthy; drive. Repeat these steps if no drive letter appears.

8 4. At Add Drive Letter or Path box, select Assign the following drive letter , choose an available drive letter from the drop down box, then click OK. Figure 5 5. A drive letter should be assigned to the Healthy drive. Repeat these steps if no drive letter appears. Figure 6

Page 10 - Mac OS Driver Installation; To Verify Mac Installation; Mac OS Hot-swapping Hard Disk Drives

10 Mac OS Driver Installation This section provides information on how to install theeSATA II 2-Port ExpressCard drivers. 1. Insert driver CD. At the desktop double click Driver icon. 2. Double click Mac folder. 3. Double click Sil3132_1.1.9u_Si1_Pkg.pkg. 4. Click Continue, Continue, Continue, then ...

Page 11 - Technical Support and Warranty; s Online Support has answers! Simply visit our

11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online supportdatabase is updated daily with new drivers and solutions. Answersto your questions could be just a few clicks away. You can also submitques...