SIIG 104-0487A - Manual
SIIG 104-0487A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; eSATA II 2-Port ExpressCard; Layout; Hardware Installation
- Page 3 – Windows Driver Installation; this time
- Page 4 – Windows Vista; and install driver software (recommended); To Verify Windows Installation
- Page 5 – For Windows Vista: Right click Computer, click; Manage; For Windows Server 2008: Right click Computer and; Double click either SCSI and RAID controllers or; should be displayed.; Windows Device Connection; External Devices; Right click My Computer and click Manage. (For
- Page 6 – You can now unplug the hard disk.; Note; Assigning a Drive Letter in Windows; Right click My Computer, click Manage, click Disk
- Page 7 – Right click on the Healthy disk, that does not have; At Change Drive Letters and Paths box, click Add.
- Page 8 – , choose an available drive; letter from the drop down box, then click OK.; A drive letter should be assigned to the Healthy; drive. Repeat these steps if no drive letter appears.
- Page 10 – Mac OS Driver Installation; To Verify Mac Installation; Mac OS Hot-swapping Hard Disk Drives
- Page 11 – Technical Support and Warranty; s Online Support has answers! Simply visit our
1
0 4 - 0 4 8 7 A
Introducing the eSATA II 2-Port ExpressCard
The eSATA II 2-Port ExpressCard is an ultra high-speed
dual channel Serial ATA Generation 2 controller.
Features and Benefits
•
A d d s t w o e x t e r n a l ( e S A T A ) p o r t s t o y o u r
ExpressCard equipped notebook computer for
external drive connections
•
Supports data transfer speeds up to 3.0Gb/s
(300MB/s)
•
Supports Native Command Queuing (NCQ) and
SATA TCQ commands
•
Compliant with Serial ATA 1.0a specification
•
Compliant with eSATA (external SATA) connector
specifications
•
Supports SATA hard disk hot-plugging
•
Breaks the 137GB barrier! Works with various
brands of large capacity Serial ATA hard disks
System Requirements
•
PC or Mac notebook with an available ExpressCard
slot
•
Windows
®
2000 / XP (32-/64-bit) / Server 2003 &
2008 (32-/64-bit) / Vista (32-/64-bit)
•
Mac OS
®
X v10.4.9 - v10.5.6
eSATA II 2-Port ExpressCard
Quick Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • eSATA II 2-Port ExpressCard • Driver CD • Quick Installation Guide Layout eSATAconnectors Figure 1: eSATA II 2-port ExpressCard Hardware Installation General instructions for installing the ExpresscCard areprovided. Since the design of systems may vary, refer toyour system refer...
3 Windows Driver Installation This section provides instructions to install the eSATA II2-Port ExpressCard drivers. Windows 2000 1. Install the ExpressCard into an ExpressCard slot. 2. At the Found New Hardware Wizard, click Next. 3. Select Search for a suitable driver for my device (recommended) an...
4 3. Insert the driver CD, select Install the software automatically (Recommended) , click Next, then click Next again. 4. Click Finish then restart Windows to complete the driver installation. Windows Vista TM (32-/64-bit) 1. Install the ExpressCard into an ExpressCard slot. 2. At the Found New Har...
