SIIG 04-0721B - Manuals - manualsarea.com

Page 2 - System Requirements; Pentium; Package Contents; board; Layout

2 System Requirements • Pentium ® or equivalent computer with an available PCI or PCI-X slot • Windows ® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / Server 2008 R2 / 2000 / ME / 98SE / 98 / 95 Package Contents • DP 1-Port ECP/EPP Par...

Page 3 - Hardware Installation; Note; For low profile

3 Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your c o m p u t e r ’ s r e f e r e n c e m a n u a l f o r f u r t h e r information, if needed.Static Electricity Discharge may permanently d...

Page 4 - Driver Installation

4 4. To install the card, carefully align the card's bus connector with the selected PCI slot on the motherboard. Push the board down firmly, but gently, until it is well seated. 5. Replace the slot bracket's holding screw to secure the card. 6. Replace the computer cover and reconnect the power cor...

Page 9 - To Verify Windows Installation; For Windows Vista

9 4. Insert the driver CD, type in D:\2000 , then click OK . (Change D: to match your CD/ DVD-ROM drive letter) 5. Click Next , then click Finish to complete the installation. To Verify Windows Installation 1. C h e c k i n D e v i c e M a n a g e r t o v e r i f y installation. For Windows 8 / 7 : ...

Page 10 - Windows ME

1 0 Windows ME 1. At the Add New Hardware Wizard , select S p e c i f y t h e l o c a t i o n o f t h e d r i v e r (Advanced) , click Next . 2. Check Specify a location , uncheck the other box, insert the driver CD, type in D:\ME, then click Next. (Change D: to match your CD/DVD-ROM drive letter) 3...

Page 12 - From the Windows desktop, double click; My Computer; then; Device Manager; Double click

1 2 To Verify Windows ME / 98SE / 98 / 95Installation 1. From the Windows desktop, double click My Computer , Control Panel , System , then click Device Manager . 2. Double click Ports (COM & LPT) , M65-PCI ECP Parallel Port..... should be displayed.

Page 13 - Changing Parallel Port Number

1 3 Changing Parallel Port Number Windows 8 / 7 / Vista / XP / 2003 / 2008 /2008 R2 / 2000 Some parallel port devices need a specific LPT in order to function properly. If your parallel port device works, do not make any changes. Note : this feature is not available in Windows ME / 98SE / 98 / 95.1....

Page 14 - Blank Page

Page 15 - Technical Support and Warranty

1 5 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit...