SIIG 04-0721B - Manual
SIIG 04-0721B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – System Requirements; Pentium; Package Contents; board; Layout
- Page 3 – Hardware Installation; Note; For low profile
- Page 4 – Driver Installation
- Page 9 – To Verify Windows Installation; For Windows Vista
- Page 10 – Windows ME
- Page 12 – From the Windows desktop, double click; My Computer; then; Device Manager; Double click
- Page 13 – Changing Parallel Port Number
- Page 14 – Blank Page
- Page 15 – Technical Support and Warranty
1
04-0721B
DP 1-Port ECP/EPP
Parallel PCI
Quick Installation Guide
I
ntroduction
The
DP 1-Port ECP/EPP Parallel PCI
is a high-
speed parallel card that provides one additional
parallel port to your system.
Key Features and Benefits
•
Adds 1 ECP/EPP parallel port to your PCI
based system
•
Dual Profile design to work with standard
height and low profile chassis
•
Compliant with PCI Local Bus Specification,
Revision 2.3
•
Supports data transfer rate up to 1.5MB/s
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 System Requirements • Pentium ® or equivalent computer with an available PCI or PCI-X slot • Windows ® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / Server 2008 R2 / 2000 / ME / 98SE / 98 / 95 Package Contents • DP 1-Port ECP/EPP Par...
3 Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your c o m p u t e r ’ s r e f e r e n c e m a n u a l f o r f u r t h e r information, if needed.Static Electricity Discharge may permanently d...
4 4. To install the card, carefully align the card's bus connector with the selected PCI slot on the motherboard. Push the board down firmly, but gently, until it is well seated. 5. Replace the slot bracket's holding screw to secure the card. 6. Replace the computer cover and reconnect the power cor...
