SIIG 04-0660A - Manuals

A1 D (×4) M8/M6 rectangular washer A2 E (×6) M6 x 50 bolt B1 F (×6) M6 concrete anchor B2 G1 (x6) M6 washer C1 G2 External bubble level C2 H (×4) M5×12 screw (×4) Spacer (×4) M5×30 screw (×4) M8×30 screw (×4) M6×30 screw Hardware kit: Recommended mounting surfaces: wood stud and solid-flat concrete....

1 2 3 4 A) Wood Stud Installation 3 4 5 6 7 CAUTION: Do not over-tighten bolts-doing so many cause unnecessary damage to the wall. Avoid excessive torque. Next, pre-drill a 1/8" hole to a depth of approximately 2" in the wood stud at each marked location. Place the wall plate against the wal...

NOTE: 1 2 3 4 5 6 7 5 The concrete anchors must be used for concrete installation. 4 Tighten the bolt with a 7/16" socket or open ended wrench by turning clockwise until tight. Attach the bubble level (G2) to the wall plate, with the help of an assistant place the wall plate into position agains...