SIIG 04-0660A - Manual
SIIG 04-0660A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Caution; INSTALLATION AND OPERATING INSTRUCTIONS
- Page 3 – A) Wood Stud Installation; Phillips head screw driver; Step1: Wall Plate Installation
- Page 4 – The concrete anchors must be used for concrete installation.; Step 2 Display Bracket Installation
- Page 5 – Check the mounting screws every two months for tightness.; Maintenance; Hook the TV rails over the top of the wall plate.
- Page 6 – Blank Page
- Page 7 – Technical Support and Warranty
- Page 8 – PRODUCT NAME
04-0660A
Max load capacity: 132lbs / 60kgs
Low Profile Universal TV Mount - 23" to 42"
IMPORTANT: If you don't understand the installation instructions, please consult an installation
specialist
Fixed Flat-Panel TV Wall Mount
Universal Mounting Pattern
Material: 2.0mm Cold Rolled Steel Plate
TV Size: 23" - 42"
Installation Instructions
Wall distance: 1.38" / 35mm
Bubble level included
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
A1 D (×4) M8/M6 rectangular washer A2 E (×6) M6 x 50 bolt B1 F (×6) M6 concrete anchor B2 G1 (x6) M6 washer C1 G2 External bubble level C2 H (×4) M5×12 screw (×4) Spacer (×4) M5×30 screw (×4) M8×30 screw (×4) M6×30 screw Hardware kit: Recommended mounting surfaces: wood stud and solid-flat concrete....
1 2 3 4 A) Wood Stud Installation 3 4 5 6 7 CAUTION: Do not over-tighten bolts-doing so many cause unnecessary damage to the wall. Avoid excessive torque. Next, pre-drill a 1/8" hole to a depth of approximately 2" in the wood stud at each marked location. Place the wall plate against the wal...
NOTE: 1 2 3 4 5 6 7 5 The concrete anchors must be used for concrete installation. 4 Tighten the bolt with a 7/16" socket or open ended wrench by turning clockwise until tight. Attach the bubble level (G2) to the wall plate, with the help of an assistant place the wall plate into position agains...
