SIIG 04-0417C - Manuals - manualsarea.com

Page 2 - Hardware Installation; Package Contents; eSATA II ExpressCard; Layout

2 eSATA Connectors Figure 1: eSATA II ExpressCard Hardware Installation General instructions for installing the card are provided below. Since the design of systems may vary, refer to your system’s reference manual for further information, if needed.Insert the eSATA II ExpressCard into the ExpressCa...

Page 3 - Driver Installation

3 Driver Installation Windows 7 (32-/64-bit) 1. Install the ExpressCard into an ExpressCard slot. 2. Insert the driver CD. (Close the AutoPlay box if prompted) 3. Right click Computer , click Manage , then click Device Manager . 4. Right click Mass Storage Controller , click Update Driver Software ....

Page 4 - To Verify Windows Installation; For Windows Vista

4 Windows Server 2008 (32-/64-bit) 1. Install the ExpressCard into an ExpressCard slot. 2. At the Found New Hardware window, select Locate and install driver software (Recommended) , then click Don't Search Online . 3. When prompted, insert the driver CD and Windows will automatically install the co...

Page 5 - eSATA II; Safely Remove External Hard Disk Drives; Windows 7

5 External Device Connection External Serial ATA devices should come with their own accessories. In most cases, you just need to power up the external device and connect it to the external port. For more information, please refer to the external device's manual. Connecting Hard Disk Drives When conn...

Page 6 - Removing the

6 Windows XP / Server 2003 / 2000 1. Right click My Computer and click Manage . 2. Select Device Manager . 3. Double click Disk Drives , right click the target disk. 4. Click Uninstall . Click OK to confirm device removal 5. You can now unplug or turn off the hard disk. Windows Server 2008 1. Right ...

Page 7 - Windows Vista / Server 2008

7 Windows Vista / Server 2008 The eSATA II ExpressCard will appear in the Safely Remove Hardware utility only if it is plugged into the computer before booting up Windows.1. The utility is located in the taskbar by the system clock. 2. Click the Safely Remove Hardware icon. 3. Click Safely remove Si...

Page 8 - Assigning Drive Letter to an External Hard Disk

8 Assigning Drive Letter to an External Hard Disk Most external hard disks come formatted and ready to use. When connected, a drive icon will show up in Computer/My Computer and you can access the drive. However, sometimes Windows will not automatically assign a drive letter to a formatted external ...

Page 9 - Right click on the; Healthy; disk (the disk without a; Change Drive; At Change Drive Letters and Paths, click; Add

9 2. Right click on the Healthy disk (the disk without a name and drive letter), then click Change Drive Letter and Paths . See Figure 3 . Figure 3 3. At Change Drive Letters and Paths, click Add . Figure 4

Page 11 - Technical Support and Warranty; Online Support

11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit ...