SIIG 04-0417C - Manual
SIIG 04-0417C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hardware Installation; Package Contents; eSATA II ExpressCard; Layout
- Page 3 – Driver Installation
- Page 4 – To Verify Windows Installation; For Windows Vista
- Page 5 – eSATA II; Safely Remove External Hard Disk Drives; Windows 7
- Page 6 – Removing the
- Page 7 – Windows Vista / Server 2008
- Page 8 – Assigning Drive Letter to an External Hard Disk
- Page 9 – Right click on the; Healthy; disk (the disk without a; Change Drive; At Change Drive Letters and Paths, click; Add
- Page 11 – Technical Support and Warranty; Online Support
1
eSATA II ExpressCard
Quick Installation Guide
04-0417C
Introducing the
eSATA II ExpressCard
The
eSATA II ExpressCard
is an ultra high-speed dual
channel Serial ATA Generation 2 controller.
Features and Benefits
•
Adds two eSATA (external Serial ATA) ports to
your ExpressCard equipped notebook or desktop
computer for external drive connections
•
Supports data transfer speeds up to 3 Gb/s (300
MB/s)
•
Compliant with Serial ATA 1.0a specification with
support for full complement of SATA II optional
features
•
Supports Native Command Queuing (NCQ), Non-
zero offsets NCQ, and Out-of-order data delivery
NCQ
•
Independent command fetch, scatter/gather, and
command execution
•
Supports SATA hard disk hot-plugging
•
Breaks the 137 GB barrrier! Supports various brands
of large capacity Serial ATA hard disk drives
System Requirements
•
ExpressCard-enabled system with an available
ExpressCard/54 slot
•
Windows
®
7 (32-/64-bit) / Vista (32-/64-bit) / XP
(32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 eSATA Connectors Figure 1: eSATA II ExpressCard Hardware Installation General instructions for installing the card are provided below. Since the design of systems may vary, refer to your system’s reference manual for further information, if needed.Insert the eSATA II ExpressCard into the ExpressCa...
3 Driver Installation Windows 7 (32-/64-bit) 1. Install the ExpressCard into an ExpressCard slot. 2. Insert the driver CD. (Close the AutoPlay box if prompted) 3. Right click Computer , click Manage , then click Device Manager . 4. Right click Mass Storage Controller , click Update Driver Software ....
4 Windows Server 2008 (32-/64-bit) 1. Install the ExpressCard into an ExpressCard slot. 2. At the Found New Hardware window, select Locate and install driver software (Recommended) , then click Don't Search Online . 3. When prompted, insert the driver CD and Windows will automatically install the co...
