SIIG 04-0341D - Manuals - manualsarea.com

Page 2 - Package Contents; CyberPro PCI 2S board; Layout; Note: Most serial devices do not require additional; power through the serial port. Refer to your serial

2 Package Contents • CyberPro PCI 2S board • Driver CD • Quick installation guide Layout Figure 1. Layout Jumper Settings (JP1, JP2) Open = 0 volts (default)Short 1-2 = 5VShort 2-3 = 12V Note: Most serial devices do not require additional power through the serial port. Refer to your serial device's ...

Page 3 - Hardware Installation

3 Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed.Static Electricity Discharge may permanently damage your system. Discharge a...

Page 4 - Driver Installation; CyberPro PCI 2S drivers.; Update Driver Software.; Windows Vista

4 Driver Installation This section provides information on how to install the CyberPro PCI 2S drivers. Windows 7 (32-/64-bit) 1. Right click Computer, click Manage, click Device Manager. 2. Insert the driver CD. Right click PCI Serial Port, click Update Driver Software. 3. Click Browse my computer f...

Page 6 - For Windows Vista: Right click Computer, click; CyberPro 2S board should be displayed.

6 To Verify Windows 7 / Vista / XP / Server 2003 &2008 Installation 1. Check in Device Manager to verify installation.For Windows 7: Right click Computer, click Manage, then click Device Manager. For Windows Vista: Right click Computer, click Manage, click Continue, then click Device Manager. Fo...

Page 7 - To Verify Windows 2000 Installation; Windows ME

7 To Verify Windows 2000 Installation 1. Right click My Computer, click Manage, then click Device Manager. 2. Click on the + (plus sign) in front of Ports (COM & LPT), CyberSerial 16Cxxx... should be displayed two times. 3. Double click Multifunction adapters, SIIG CyberPro 2S board should be di...

Page 9 - Restart Windows to complete the installation.; To Verify Windows NT 4.0 Installation; Two new COM ports will be assigned when; successfully installed.

9 5. Click Yes, then click Exit. 6. Restart Windows to complete the installation. To Verify Windows NT 4.0 Installation 1. Click Start, Settings, Control Panel. Double click Ports device icon. 2. Two new COM ports will be assigned when successfully installed.

Page 10 - Changing COM Port Address; CyberSerial serial port you want to change.

10 Changing COM Port Address Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. Windows 7 / Vista / XP / Server 2003 & 2008 / 2000 1. From the Device Manager window double click Ports (COM & LPT), then double click...

Page 11 - Technical Support and Warranty

11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit q...