SIIG 04-0341D - Manual
SIIG 04-0341D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; CyberPro PCI 2S board; Layout; Note: Most serial devices do not require additional; power through the serial port. Refer to your serial
- Page 3 – Hardware Installation
- Page 4 – Driver Installation; CyberPro PCI 2S drivers.; Update Driver Software.; Windows Vista
- Page 6 – For Windows Vista: Right click Computer, click; CyberPro 2S board should be displayed.
- Page 7 – To Verify Windows 2000 Installation; Windows ME
- Page 9 – Restart Windows to complete the installation.; To Verify Windows NT 4.0 Installation; Two new COM ports will be assigned when; successfully installed.
- Page 10 – Changing COM Port Address; CyberSerial serial port you want to change.
- Page 11 – Technical Support and Warranty
1
C y b e r P r o P C I 2 S
Quick Installation Guide
0 4 - 0 3 4 1 D
Introducing the CyberPro PCI 2S
The CyberPro PCI 2S high-speed serial I/O card provides
two additional 9-pin serial ports.
Features and Benefits
•
Conforms to PCI v2.2 Plug and Play
•
Full support for Windows-based software
•
R e d u c e s C P U l o a d a n d i m p r o v e s s y s t e m
performance dramatically
•
IRQ sharing feature reduces IRQ conflicts
•
High-speed serial port (9-pin) works with 56K V.90
external modems, ISDN terminal adapters, PDAs,
digital cameras, label printers and other serial port
devices
•
Built-in FIFO buffers dramatically increase data
transmit/receive speed, especially under Windows'
multitasking environment
•
Each serial port can be configured for either 5V or
12V output, for serial devices that require power
System Requirements
•
Pentium
®
or equivalent computer with an available
PCI slot
•
Windows
®
7 (32-/64-bit) / Vista (32-/64-bit) / XP
(32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000
/ NT 4.0 / ME / 98SE / 98 / 95
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • CyberPro PCI 2S board • Driver CD • Quick installation guide Layout Figure 1. Layout Jumper Settings (JP1, JP2) Open = 0 volts (default)Short 1-2 = 5VShort 2-3 = 12V Note: Most serial devices do not require additional power through the serial port. Refer to your serial device's ...
3 Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed.Static Electricity Discharge may permanently damage your system. Discharge a...
4 Driver Installation This section provides information on how to install the CyberPro PCI 2S drivers. Windows 7 (32-/64-bit) 1. Right click Computer, click Manage, click Device Manager. 2. Insert the driver CD. Right click PCI Serial Port, click Update Driver Software. 3. Click Browse my computer f...
