SIIG 04-0288E - Manuals - manualsarea.com

Page 2 - System Requirements; Recommended system for DV capturing editing:; Package Contents

2 • IEEE 1394-1995, P1394a (rev. 1.1) and OHCI Interface Specification 1.0 compliant • Supports serial bus data transfer rates of 100, 200 and 400 Mbps System Requirements • Pentium or equivalent computer with an available PCI slot • Windows 98SE/ME • Windows 2000 (with SP 3) or later • Windows XP (...

Page 3 - Board Layout; optional

3 Board Layout Figure 1. Board Layout Power Connector (optional) USB 2.0 Port USB 2.0 Ports 1394 Ports 1394 Port Note: This power connector (same as the one used with your floppy disk drive) is designed to provide additional power to the board when needed. This connection is optional . We recommend ...

Page 4 - Add New Hardware

4 Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed.Static Electricity Discharge may permanently damage your system. Discharge a...

Page 5 - Windows ME

5 3. Click Start , then Run . Type in X:\setup.exe and click OK . (Change X: to match your CD-ROM drive letter) 4. Click Next , Next , at the Warning box click OK , then click Finish to restart. 5. When the VIA ...Universal Host Controller is detected, click Next . 6. Choose Search for the best driv...

Page 7 - To Verify Successful Driver Installation

7 8. When Windows restarts, the drivers will install automatically. Windows XP/Server 2003 Windows XP Service Pack 1 (SP 1) or later is required for this installation.Windows XP Service Pack 1 or later will automatically detect and install the correct drivers for this board.Windows 2003 Server will ...

Page 8 - or

8 b) Under the 1394 Bus Controller or IEEE 1394 Bus host controllers: - VIA OHCI Compliant IEEE 1394 Host Controller Windows 2000 (with SP4 or later): a) Under the Universal Serial Bus Controllers: - VIA ... Universal Host Controller - VIA ... Universal Host Controller - VIA USB Enhanced Host Contro...

Page 9 - Ulead VideoStudio Software Installation; Connecting DV Camcorder

9 Ulead VideoStudio Software Installation The USB 2.0 + 1394 DV Kit includes Ulead ® VideoStudio TM digital video editing software for producing home videos complete with attractive titles, transitions and sounds. Before installing VideoStudio, make sure your adapter and DV camcorder are properly in...

Page 10 - To Verify Successful DV Camcorder Setup

10 To Verify Successful DV Camcorder Setup 1. Check Device Manager to verify successful driver installation. Windows 98SE/ME: From the main desktop, right click My Computer , then click Properties . Click Device Manager tab. Windows 2000/XP/2003: Right click My Computer , click Manage , then click D...

Page 11 - Technical Support and Warranty; O n l i n e S u p p o r t

11 Technical Support and Warranty Q U E S T I O N S ? S I I G ’ s O n l i n e S u p p o r t h a s a n s w e r s ! Simply visit our website at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few...

Page 12 - Networking, Sound Cards, and other accessories. SIIG is the premier

USB 2.0+FireWire DV Kit is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification onl...