Page 2 - Warranty Against Defects
2 3 Spectrum Brands Australia Pty Ltd Locked Bag 3004 BraesideVictoria 3195 Australia Customer Service in Australia Toll Free: 1800 623 118 Email: [email protected] Website: www.spectrumbrands.com.au Spectrum Brands New Zealand Ltd PO Box 9817 NewmarketAuckland 1149 New Zealand Customer Service in N...
Page 4 - burst of; BEFORE USING FOR THE FIRST TIME; any manufacturing residues. Refill the tank.
4 5 self clean temperature control burst of steam button cool spray mist button water tank BEFORE USING FOR THE FIRST TIME • Fill the water tank with clean water, and then empty the water to ensure the tank is clean of any manufacturing residues. Refill the tank. • The iron may give off an odour and...
Page 5 - max; FILLING; ‘max’; SWITCHING ON; ‘synthetic’; steam control
4 5 PREPARATION • Check for textile care symbols ( ) on items to be ironed. • Iron fabrics needing low temperatures first, then those that need medium temperatures , and finish with those needing high temperatures . TEMPERATURE SETTING GUIDE LABEL MARKING TEMPERATURE DOT SETTING cool - nylon, acryli...
Page 6 - NOTE: Water spotting affects some fabrics. Test this out on a; BURST OF STEAM
6 7 REDUCING TEMPERATURE This can take time, as the iron has to lose the heat it has built up. It is best to organise your ironing so that you do not need to reduce the temperature. STEAM IRONING When steam ironing, you must set the temperature control dial above , to ensure the iron is in the steam...
Page 7 - damaged by the steam or heat.; AFTER USE; • Turn the temperature control dial to; control to no steam.
6 7 DRY IRONING If you are going to be dry ironing only, there is no need to fill the water tank.• Move the steam control to no steam.• Set the temperature control dial to the desired setting.• Wait until the light switches off, then commence ironing. VERTICAL STEAM Vertical steaming removes wrinkle...
Page 8 - SELF CLEAN; temperature light switches off.; CLEANING; Take care not to scratch the soleplate.
8 9 SELF CLEAN To prevent residues building up, use the Self Clean button regularly, at least monthly in normal water areas, more often in hard water areas. You will require a sink or a large bowl to catch the water coming out of the soleplate.• Fill the tank to the ‘max’ level. • Sit the iron on it...