Roborock S5E02-03 - Manuals

Welcome Thank you for choosing a Roborock Robot Vacuum Cleaner. Treat yourself to crisp, just-mopped floors every day with S5 Max. Engineered for a seamless automated mopping, it has a super-sized water tank, precision water control, virtual no-mop zones, and more. Combined with precision laser mapp...

On/Off • Press to start cleaning• Press and hold to power on or off Power indicator • White: Battery level  20% • Red: Battery level < 20%• Flashing: Charging or starting up• Flashing red: Error Dock/Spot Clean • Press to return to the dock• Press and hold to spot clean Cover latch Product intro...

Product introduction Parts list 8 $IBSHJOHEPDL 1PXFSDBCMF .PQDMPUINPVOU .PQDMPUI .PJTUVSFQSPPGNBU

Product introduction Dustbin Robot System reset Air vent Air filter Dustbin latch Dustbin cover Speaker Water tank latch WiFi indicator light • Off: WiFi disabled• Slow flashing: Waiting for connection • Fast flashing: Connecting• Steady: WiFi connected 9

Product introduction Machine and sensors Bumper Recharge sensor Laser distance sensor Wall sensor Side brush Omnidirec- tional wheel Charging contact Main brush Main brush cover latch Main wheels Cliff sensor 10

Product introduction Mopping module Charging dock Water tank Water tank latch Mop cloth att- achment slot Water tank stopper Water filter Mop cloth Mop cloth bracket clip Attaching area Mop cloth bracket Charging points Signal transmitting area Charging dock power indicator Power socketCharging poin...

Double-sided tape Installation Using the robot 1. Place the charging dock against the wall on a flat surface and plug it into the mains power. Note: • The charging dock should have more than 0.5m (1.6ft) of clearance on each side, and more than 1.5m (5ft) in the front. • If the power cable is vertic...

Ώ Add device Open the app and click "+" in the top right corner, then follow the instructions in-app. Once your robot has been added, it will be found in a list on the homepage. Note: • Due to ongoing app development, the actual process may differ slightly from the above description. Always ...

Installation On/Off Press and hold the button to turn on the robot. The power indicator will turn on and the robot will enter Standby mode. If the robot is in Sleep mode, press and hold the button to turn it off and end the current cleanup. Pause When the robot is cleaning, press any button to pause...

1.5m 1.5m Instructions for use Charging Auto: After cleaning, the robot will automatically return to the charging dock to recharge.Manual: In Pause mode, press the button to send the robot back to the charging dock. The power indicator will flash slowly as the robot charges. Note: If the cleaning cy...

Instructions for use Selective Room Cleaning Select specific rooms for cleaning in the app. In this mode, the robot will only clean the selected rooms. Cleaning mode Use the app to choose from Quiet, Balanced, Strong, or MAX modes. Balanced mode is the default. Pin n Go Use the app to set a destinat...

Instructions for use More app functions Note: Functions and details of the app may vary slightly due to continuous app development and upgrades. Change Cleaning Mode Real-Time Map Updates View Cleaning History Change Robot Voice Firmware Update Part Replacement Schedule Carpet Boost Remote Control V...

Instructions for use Routine maintenance Main brush 1. Turn the robot over then unlatch and remove the main brush cover. 2. Take out the main brush, remove and clean its bearings.3. Remove the main brush cap, rotating in the unlock direction.4. Use the supplied main brush cleaning tool to remove any...

Routine maintenance Using the main brush cleaning tool Use the main brush cleaning tool to remove any hair entangled around the main brush. 2. Open the dustbin lid as indicated by the arrow and pour out the contents. Dustbin and filter 1. Open the top cover of the robot, squeeze the dustbin latch, a...

Routine maintenance 3. Remove the filter and clean it with water. Clean the washable filter 2. Fill the dustbin with clean water and close the cover. Gently shake the dustbin, then pour out the dirty water. Note: Only use fresh water without cleaning liquid. Note: To avoid damage, do not touch the s...

Routine maintenance Side brush 1. Turn the robot over and remove the screw holding the side brush.2. Remove and clean the side brush.3. Reinstall the side brush and tighten the screw. Mop cloth 1. Remove the mop cloth from the mop cloth bracket. Note: Side brush replacement every 3-6 months is recom...

Routine maintenance Omnidirectional wheel 1. Turn the robot over.2. Use a small screwdriver to separate the axle and the tire.3. Rinse the axle and tire with water to remove any hair and dirt.4. Dry and rebuild the wheel, then press it back in place. System Reset If the robot does not respond when y...

26 Environmental protection description Removing the battery The chemical substances contained in the built-in lithium-ion battery of this product can cause environmental pollution. Remove the battery before disposing of this product and hand it to a professional battery recycling facility for centr...

Basic parameters Robot Charging dock Note: The serial number is on a sticker on the underside of the robot. Name Parameters 353×350×96.5mm Dimensions 14.4V/5200mAh lithium battery Battery Approx. 3.5 kg Weight WiFi Smart Connect Wireless connection 58W Rated power Rated voltage 14.4VDC Name Paramete...

Error Solution Error 1: Rotate the laser head to check that it turns freely. The LDS unit is jammed. Remove any items blocking it then move the robot to a new location and restart. Error 8: Clear away any obstacles around the robot. The robot may be stuck. Clear any obstacles around it. Error 2: Cle...

FAQs Problem Solution Unable to power on The battery level is low. Put the robot on the charging dock to charge it before use. The battery temperature is too low or too high. Only use the robot within the range of 4-40°C (39-104°F). Unable to connect to WiFi WiFi is disabled. Reset the WiFi and try ...

Hereby we: Name of manufacturer Address Beijing Roborock Technology Co.,Ltd. )ORRU6XLWH%XLOGLQJ&.DQJMLDQ%DRVKHQJ3OD]Db No.8 Heiquan Road, Haidian District, Beijing, P.R.CHINA declare that this DoC is issued under our sole responsibility and that the products: Product description Type(model) desi...

Low Voltage Directive 2014/35/EU1. EN 60335-1:2012 + A11:2014+AC:2014+A13:20172. EN 60335-2-29:2004 + A2:2010+A11: 20183. EN 62233:2008 1.Household and similar electrical appliances-Safety-Part 1: General requirements2.Household and similar electrical appliances-Safety-Part 2-29: Particular requirem...

WEEE Information Correct Disposal of this product . This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the susta...

Warranty Information Warranty Information The warranty period depends on the laws of the country in which the product is sold, and the warranty is the responsibility of the seller.The warranty only covers defects in material or workmanship.The repairs under warranty may only be carried out by an aut...