Husqvarna YTH22V42LS - Manuals

Husqvarna YTH22V42LS – Manual in PDF format online.

Manuals:

Manual

Manual Husqvarna YTH22V42LS

Summary

Page 2 - SAFETY RULES; Safe Operation Practices for Ride-On Mowers; WARNING

2 SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION • Read, understand, and follow all...

Page 3 - SAFE HANDLING OF GASOLINE

3 SAFETY RULES Safe Operation Practices for Ride-On Mowers • Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area. • Never carry passengers.• Do not mow in reverse unless absolutely necessary. Al ways look down and behind before and while back- ing. • Ne...

Page 4 - TABLE OF CONTENTS; PRODUCT SPECIFICATIONS; CONGRATULATIONS; CUSTOMER RESPONSIBILITIES

4 SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICATIONS ....................................... 4 CUSTOMER RESPONSIBILITIES ................................. 4 ASSEMBLY ................................................................. 5-6 OPERATION ..........

Page 5 - UNASSEMBLED PARTS; Keys; ASSEMBLY; TO REMOVE TRACTOR FROM CARTON; UNPACK CARTON; BEFORE REMOVING TRACTOR FROM

5 UNASSEMBLED PARTS Keys (2) Keys Slope Sheet ASSEMBLY Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. Fig. 1 TO CHECK BATTERY (See Fig. 1) • Lift hood to raised position. NOTE: If this battery is put into service after mon...

Page 6 - CHECKLIST

6 ASSEMBLY CHECK TIRE PRESSURE The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.• Reduce tire pressure to PSI shown on tires. CHECK DECK LEVELNESS For best cutting results, mower housing should be prop- ...

Page 7 - OPERATION

7 OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models only) KEEP AREA CLEAR SLOPE HAZARDS 15 15 (SEE SAFETY RULES SECTION) BATTERY REVERSE FORWARD FAST SLOW EN...

Page 8 - KNOW YOUR TRACTOR; POSITION

8 OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Our tractors conform to the appli...

Page 9 - HOW TO USE YOUR TRAC TOR

9 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide ...

Page 10 - TO ADJUST MOWER CUT TING HEIGHT

10 OPERATION TO ADJUST MOWER CUT TING HEIGHT (See Fig. 8) The po si tion of the at tach ment lift le ver (A) de ter mines the cut ting height. TO MOVE FORWARD AND BACKWARD (See Fig. 7) The direction and speed of movement is controlled by the forward and reverse drive pedals.• Start tractor and relea...

Page 11 - TO OPERATE ON HILLS; TOWING CARTS AND OTHER AT TACH MENTS; TO STOP MOWER BLADES

11 Fig. 10 OPERATION Fig. 11 TO TRANSPORT (See Figs. 3 and 11) When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in free wheel ing po- si tion. Free wheel control is located at the rear drawbar of tractor.• Raise attachment lift to highest position w...

Page 12 - BEFORE STARTING THE ENGINE; CHECK ENGINE OIL LEVEL

12 OPERATION CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW 32°F(0°C), USE FRESH, CLEAN WINTER GRADE GAS O LINE TO HELP ENSURE GOOD COLD WEATHER START ING. CAUTION: Alcohol blended fuels (called gasoh...

Page 13 - PURGE TRANSMISSION; may be movement of the drive wheels.; MOWING TIPS; Always operate engine at full throttle when mow-

13 OPERATION PURGE TRANSMISSION CAUTION: Never engage or disengage freewheel lever while the engine is run ning. To ensure proper operation and performance, it is rec om- mend ed that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air i...

Page 14 - MAINTENANCE; LUBRICATION CHART; GENERAL RECOMMENDATIONS; BEFORE EACH USE

14 MAINTENANCE ➀ General Purpose Grease ➁ Refer to Maintenance “ENGINE” Section 01965 ➁ ENGINE ➀ FRONT WHEEL BEARING ZERK ➀ STEERING SECTOR GEAR TEETH ➀ FRONT WHEEL BEARING ZERK ➀ SPINDLE ZERK ➀ SPINDLE ZERK T RAC T 0 R 1 - Change more often when operating under a heavy load or in high ambient tempe...

Page 15 - TRACTOR; BLADE CARE

15 MAINTENANCE TRACTOR Always observe safety rules when per form ing any main te nance. BRAKE OPERATION If tractor requires more than five (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved surface, then brake must be checked and ad just ed. (See “TO CHECK BRAKE” in...

Page 16 - ENGINE

16 MAINTENANCE V-BELTS Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not ad just able. Re place belts if they begin to slip from wear. Fig. 16 ENGINE LUBRICATION Only use high quality detergent oil rated with API service classification ...

Page 17 - CLEANING; Avoid all pinch points and

17 MAINTENANCE CLAMP FUEL FILTER Fig. 17 Fig. 18 • Keep finished surfaces and wheels free of all gasoline, oil, etc. • Protect painted surfaces with automotive type wax.We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and trans- mission are covered t...

Page 18 - SERVICE AND ADJUSTMENTS; TO INSTALL MOWER

18 SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and remove key. • Make sure the blades and all moving par...

Page 20 - your hands with gloves and/or wrap; TO LEVEL MOWER; NOTE

20 SERVICE AND ADJUSTMENTS FRONT-TO-BACK ADJUSTMENT (See Figs. 28 & 29) IMPORTANT: Deck must be level side-to-side. To obtain the best cutting re sults, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position....

Page 21 - TO CHECK BRAKE

21 SERVICE AND ADJUSTMENTS TO CHECK BRAKE If tractor requires more than five (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved surface, then brake must be serviced.You may also check brake by:• Park tractor on a level, dry concrete or paved surface, depress brake p...

Page 22 - TO START ENGINE WITH A WEAK BATTERY; TO REMOVE WHEEL FOR REPAIRS; TO REPLACE MOTION DRIVE BELT

22 SERVICE AND ADJUSTMENTS TO START ENGINE WITH A WEAK BATTERY (See Fig. 35) WARNING : Lead-acid batteries gen- er ate ex plo sive gases. Keep sparks, flame and smoking ma te ri als away from bat ter ies. Always wear eye pro tec tion when around batteries. If your battery is too weak to start the en...

Page 23 - nals by allowing a wrench or any other; TRANSMISSION

23 SERVICE AND ADJUSTMENTS TO REPLACE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill. • Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill. • Close hood. TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 37) • ...

Page 24 - BATTERY; FUEL SYSTEM; ENGINE OIL; OTHER; STORAGE

24 Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. WARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in an...

Page 25 - TROUBLESHOOTING

25 PROBLEM CAUSE CORRECTION Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Bad spark plug. 4. Replace spark plug. 5. Dirty air filter. 5. Clean...

Page 27 - SCHEMATIC; TES

27 TRACTOR - MODEL NO. YTH22V42LS (96043011301), PRODUCT NO. 960 43 01-13 SCHEMATIC NO TES M FUSE STARTER SOLENOID BATTERY ELECTRIC CLUTCH CLUTCH/BRAKE (PEDAL UP) REVERSE SWITCH (NOT IN REVERSE) SEAT SWITCH (NOT OCCUPIED) SHORTING CONNECTOR CHASSIS HARNESS IGNITION UNIT HOUR METER REGULATOR CHASSIS ...

Page 28 - ELECTRICAL

28 TRACTOR - MODEL NO. YTH22V42LS (96043011301), PRODUCT NO. 960 43 01-13 ELECTRICAL 8 1 99 100 91 2 27 90 28 55 26 43 41 24 27 25 30 33 22 79 21 40 71 34 16 42 T15S 29 With 12V Outlet Option 59 103 46 45 0 60 AMPS 60 102 105

Page 29 - KEY PART

29 TRACTOR - MODEL NO. YTH22V42LS (96043011301), PRODUCT NO. 960 43 01-13 ELECTRICAL KEY PART NO. NO. DESCRIPTION 1 532 16 34-65 Battery 2 874 76 04-12 Bolt Hex Head 1/4-20 x 3/4 8 532 18 64-91 Box Battery 16 532 17 61-38 Switch Interlock Push-In 21 532 40 02-52 Harness Socket Light w/4152J 22 532 0...

Page 30 - CHASSIS

30 TRACTOR - MODEL NO. YTH22V42LS (96043011301), PRODUCT NO. 960 43 01-13 CHASSIS 182 176 176 175 150 130 130 177 176 37 194 194 162 282 282 36 36 285 286 283 199 284 287 14 130 130 130 202 203 208 18 15 25 207 5 176 176 205 151 206 3 137 137 214 204 297 191 chassis-tex_GT HUSQ II_2 161 130 178 165 ...

Page 32 - DRIVE

32 TRACTOR - MODEL NO. YTH22V42LS (96043011301), PRODUCT NO. 960 43 01-13 DRIVE 231 51 170 307 214 185 225 125 drive-tex_K46_pedal_72_r2 2 2 73 73 33 205 1 116 33 230 230 183 183 205 116 56 213 221 160 206 26 207 209 92 125 116 64 188 161 35 184 167 160 42 29 15 159 159 221 186 189 49 187 50 51 52 5...

Page 35 - Engine Power Rating Information

35 KEY PART NO. NO. DESCRIPTION 1 - - - - - - Engine Briggs Model No. 40H777-2421-G1 2 532 14 97-23 Muffler 9 532 19 43-20 Keeper Belt Engine 11 532 40 00-08 Clutch Electric 12 532 40 50-97 Pulley Engine 15 532 43 80-80 Tank Fuel 18 532 43 92-08 Cap 20 532 42 43-40 Control Throttle 21 532 41 63-58 S...

Page 37 - STEERING

37 KEY PART NO. NO. DESCRIPTION 1 532 43 97-40 Wheel, Steering 2 532 19 59-68 Axle Asm., Front 4 532 40 30-89 Spindle Asm., LH 5 532 40 30-90 Spindle Asm., RH 6 532 12 49-31 Bearing, Race Thrust Harden 7 532 12 17-48 Washer 25/32 x 1-5/8 x 16 Ga. 8 812 00 00-29 Ring, Clip #T5304-75 9 532 12 12-32 Ca...

Page 38 - SEAT ASSEMBLY

38 TRACTOR - MODEL NO. YTH22V42LS (96043011301), PRODUCT NO. 960 43 01-13 SEAT ASSEMBLY 1 532 42 40-71 Seat 2 532 18 01-66 Bracket Pivot Fender 3 532 14 06-75 Strap, Asm Fender 6 873 80 06-00 Nut, Lock w/Ins. 3/8-16 unc 7 532 12 41-81 Spring, Seat Cprsn 8 532 17 18-77 Bolt 5/16-18 unc x 3/4 w/Sems 1...

Page 39 - MOWER LIFT

39 TRACTOR - MODEL NO. YTH22V42LS (96043011301), PRODUCT NO. 960 43 01-13 MOWER LIFT KEY PART NO. NO. DESCRIPTION NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm KEY PART NO. NO. DESCRIPTION 2 532 42 20-27 Shaft Asm., Lift 3 532 19 52-31 Lever Asm., Lift RH 7 532 41 15-55 Grip, ...

Page 40 - MOWER DECK

40 TRACTOR - MODEL NO. YTH22V42LS (96043011301), PRODUCT NO. 960 43 01-13 MOWER DECK 3 4 5 8 9 10 12 13 14 18 19 22 23 25 26 27 28 29 30 31 33 34 40 41 42 43 44 45 46 48 49 50 51 52 53 54 56 1 2 6 7 11 15 16 17 20 21 36 58 60 24 25 34 59 42_F_elec-Tex_2 47 37 38 32 24 251 35 24 55 17 32

Page 41 - KEY PART

41 TRACTOR - MODEL NO. YTH22V42LS (96043011301), PRODUCT NO. 960 43 01-13 MOWER DECK KEY PART NO. NO. DESCRIPTION KEY PART NO. NO. DESCRIPTION NOTE : All component dimensions given in U.S. inches 1 inch = 25.4 mm 1 575 43 80-01 Deck w/Decals 42" 2 539 11 21-70 Housing Assembly 3 532 18 76-90 Was...

Page 42 - DECALS; WHEELS AND TIRES

42 TRACTOR - MODEL NO. YTH22V42LS (96043011301), PRODUCT NO. 960 43 01-13 DECALS NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm KEY PART NO. NO. DESCRIPTION 6 2 1 3 11 4 10 5 9 8 7 wheel_art_1-tex WHEELS AND TIRES KEY PART NO. NO. DESCRIPTION KEY PART NO. NO. DESCRIPTION 1 532 ...

Page 43 - SS; GG; us

43 1 5 DE G REE S M AX . FOLD ALON G DOTTED LINE THI S I S A 1 5 DE G REE S LOPE ONLY RIDE UP AND DO W N HILL, NOT ACRO SS HILL S U GG E S TED G UIDE FOR S I G HTIN G S LOPE S FOR S AFE OPERATION W ARNIN G : To avo i d s er i o us i n ju ry, operate yo u r tra c tor u p and do w n the fa c e of s lo...