Husqvarna K950 CHAIN - Manuals

English – 5 1 Anti-vibration system Check the anti-vibrationelements regularly for materialcracks and deformation. Check that the anti-vibrationelements are securelymounted between the engineunit and the handle system. The muffler is designed togive the lowest possible noiselevel and to direct the e...

6 – English SAFETY INSTRUCTIONS GENERAL SAFETY INSTRUCTIONS IMPORTANT INFORMATION!Do not use the cut-off saw until you have read theentire contents of this Operator’s Manual. Allservicing, in addition to the points listed in the section” Control, maintenance and service of the machine’s safety equip...

English – 7 SAFETY INSTRUCTIONS GENERAL WORKING INSTRUCTIONS This section takes up the basic safety precautions for workingwith the cut-off saw. Follow these general working instructions,but never use a machine without the possibility of calling forhelp in the event of an accident. Basic safety prec...

8 – English SAFETY INSTRUCTIONS WARNING! A safe distance from the cut-offsaw is 15 metres. You are responsible thatanimals and onlookers are not in the workingarea. Do not start to work with the cut-off sawbefore the working area is clear and youhave a firm foothold. • Start cutting with the engine ...

English – 9 SAFETY INSTRUCTIONS Safety Plan the work so that you donot get crushed by the barwhen the pieces fall apart.Planning is also extremelyimportant for your own safety!As it is usually a question oflarge and heavy pieces thatare cut when using thediamond chain saw the forcesare so great that...

10 – English SAFETY INSTRUCTIONS Sharpening diamond chains Chains can become dull when the wrong feeding pressure isused or when cutting some materials such as heavily reinforcedconcrete. To force a dull chain results in overheating and finallythe loss of segments (part of the chain). Sharpen agains...

English – 11 SAFETY INSTRUCTIONS Diamond chains CUTTING EQUIPMENT CAUTION! Chain breakage can result in serious injury ifthe chain is thrown towards the operator. WARNING!Under no circumstances may the diamondchain saw be converted to cut other materialsthan those it is intended for. It must never b...

12 – English WHAT IS WHAT? 1. Cylinder cover 2. Muffler 3. Fuel tank 4. Starter throttle catch 5. Choke 6. Throttle trigger lockout 7. Stop switch 8. Bar and chain 9. Water hose, quick connection 10. Chain tensioning handle 11. Counter screw 12. Throttle control What is what on the machine? 13. Comb...

English – 13 ASSEMBLY How to tension the chain Tighten the adjust screw. Close the adjust screw cover. Untensioned chain. Start with opening the adjustscrew cover. Pull the handle backwards. Continue to move the handledown-wards until you start totension the chain. Hold the bar upwards as youmove th...

English – 15 FUEL HANDLING ! Fuelling WARNING!The following precautions reducethe risk of fire: • Do not smoke or place any sources of heat in the vicinity of the fuel. • Never refuel when the engine is running.• Open the fuel cap slowly when fuelling so that any over pressure is released slowly. • ...

16 – English Start and stop WARNING! Before starting observe thefollowing: • Do not start the cut-off saw without the guide bar, chain and side cover fitted. Otherwise the clutch can come loose and cause personal injury.• Always move the cut-off saw from the filling area before starting. • Ensure th...

English – 17 MAINTENANCE Carburetor Your Partner product has been designed and manufactured tospecifications that reduce harmful emissions.After your unit has been run 8-10 tanks of fuel the engine hasbroken in. To ensure that your unit is at peak performance andproducing the least amount of harmful...

18 – English Air filter The air filter should becleaned regularly removingdust and dirt to avoid:• Carburettor malfunction• Starting problems• Reduced engine power• Unnecessary wear to engine parts • Abnormal fuel consumption The air filter system consistsof a main filter and a back-upfilter: 1) The...

English – 19 Replacing a broken or worn starter cord • Loosen the bolts that hold the starter against thecrankcase and lift off thestarter unit. • Pull out the cord approx. 30 cm and lift it out of the cut-out in the starter-pulley’speriphery. Reset the recoilspring by allowing the pulleyto slowly r...

20 – English MAINTENANCE Cooling system To maintain as low an operating temperature as possible thepower cutter is equipped with a cooling system. The cooling system consists of: 1. An air intake on thestarter unit. 2. Air flow guide. 3. Cooling fins on theflywheel. 4. Cooling fins on thecylinder 5....

English – 21 MAINTENANCE Below follows some general maintenance instructions.If you need further information please contact your serviceworkshop. Weekly maintenance 10. Check the back-up paper filter. 11. Check that the handles and the anti-vibration elements are not damaged. 12. Clean the spark plu...

22 – English TECHNICAL DATA K950 Chain Engine Cylinder volume, cm 3/ cu.in 93,6/5,7 Cylinder bore, mm/inch ∅ 56/2,2" Stroke, mm/inch 38/1,5" Idle speed, rpm 2 500 rpm Recommended max. speed, unloaded, rpm 9 800 ± 300 Power, kW 4,5 Ignition system Manufacturer FHP Type of ignition system CD S...

English – 23 EU declaration of conformity (Only applies to Europe) Partner Industrial Products, SE-433 81 Partille, Sweden , tel: +46-31949000, declare under sole responsibility that the cut-off saw Partner K950 Chain from 2002’s serial numbers and onwards (the year is clearly stated in plain text o...