Husqvarna HCS9, HCS13 - Manuals

Page 3 - INDEX

3 Operators Guide Features and Controls .............................................................. 4General Information ................................................................. 5Safety Procedures .................................................................... 5Unpacking Instruction...

Page 5 - SAFETY RULES

5 SAFETY RULES Safety Procedures 1 - Training: • Read the Operator’s manual. If the operator(s) or mechanic(s) can not read English it is theowner’s responsibility to explain this material tothem. • Become familiar with the safe operation of the equipment, operator’s controls, and safetysigns. • All...

Page 7 - ASSEMBLY; Unpacking Instructions; Assembly Instructions; Collection System; iZ MODLES

7 ASSEMBLY Unpacking Instructions Assembly Instructions Collection System Tools Required: RatchetTorque Wrench1/2" Wrench1/2" Socket9/16" Wrench9/16" Socket5/8" Socket 1. Cut plastic tie securing the hitch to the crate top. 2. Remove the top of the crate. 3. Remove the plastic ba...

Page 14 - Operating the Collection System; OPERATION

14 Operating the Collection System 1. NEVER USE THE COLLECTION SYSTEMWITHOUT THE B L O W E R A S S E M B LYAND HOSES SECURELY ATTACHED. 2. Make sure hoses are connected at bothends. Inspect hoses prior to each use. 3. Do not use the unit on slopes greater than10 degrees. 4. The mower must be running...

Page 15 - Preventative Maintenance Schedule; SERVICE AND MAINTENANCE; WARNING; Cleaning and Washing

15 Preventative Maintenance Schedule Item Before Every Every Every Each Use 5 Hours 25 Hours 50 Hours Inspect/Clean Poly Mesh X X Check/Tighten Nuts & Bolts X Check/Tighten Hoses X Turn Hose End to End X Rotate Hose X Clean Machine X Inspect Bags X SERVICE AND MAINTENANCE WARNING The collection ...

Page 16 - Caring For Hoses; Cleaning Poly Mesh

16 Caring For Hoses 1. Inspect hoses before each use. If hoses have excessive wear, tears, or punctures, replaceimmediately. 2. To prolong the life of the hose, periodically ro- tate hose and turn hose end to end. Refer toPreventative Maintenance Schedule in thismanual. 3. Avoid twists and sharp tur...

Page 17 - Troubleshooting Guide; DANGER

17 PROBLEM POSSIBLE CAUSE CORRECTION Loss of Vacuum. 1. Blower, hose or hood inlet clogged. 1. Remove hose and clean inlet. 2. Bags full. 2. Inspect and empty. 3. Fan blades bent or broken. 3. Replace/repair impeller. 4. Poly mesh plugged. 4. Clean poly mesh. Unusual vibration 1. Solid object jammed...

Page 18 - SPINDLE DRIVE ASSEMBLY

18 NOTE: Your Front Weight Bar may look different from those shown in this diagram. SPINDLE DRIVE ASSEMBLY

Page 19 - PARTS ILLUSTRATIONS

Page 20 - HOOD ASSEMBLY

20 HOOD ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 22 10 20 5 23 19 23 23 21 23 20 14 24

Page 22 - HITCH ASSEMBLY

22 HITCH ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15 17 18 19 20 16 15 11 15 11 15 11

Page 24 - BLOWER ASSEMBLY

24 BLOWER ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 37 3 15 37 37 37 37 27 33 40 LOCKING COLLAR THIS SIDE UP THIS SIDE DOWN HUB DOWN 42 43 44 39

Page 26 - WEIGHT KIT

26 WEIGHT KIT ITEM PART NO. QTY DESCRIPTION 1 ......... 539020255 ...... 1 .......... WEIGHT BAR, FRONT2 ......... 539111313 ....... 1 .......... HOLD DOWN, WEIGHT BAR3 ......... 539102049 ...... 2 .......... CLEVIS PIN4 ......... 539108096 ...... 2 .......... SPRING RETAINER5 ......... 539111259 .....

Page 27 - MODEL HCS9

27 WEIGHT KIT MODEL HCS9 ITEM PART NO. QTY DESCRIPTION 1 ......... 539111313 ....... 1 .......... HOLD DOWN, WEIGHT BAR2 ......... 539102049 ...... 2 .......... CLEVIS PIN3 ......... 539108096 ...... 2 .......... SPRING RETAINER4 ......... 539111337 ....... 1 .......... WEIGHT BAR5 ......... ER92531...

Page 28 - MOUNTING KIT

28 MOUNTING KIT MODEL HCS13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 9 12 14 REF.

Page 32 - BAG ASSEMBLY

32 BAG ASSEMBLY ITEM PART NO. QTY DESCRIPTION 1 ......... 539110063 ....... 1 .......... HANGER, BAG2 ......... 539111166 ....... 1 .......... TUBE, BAG FRAME3 ......... 539111168 ....... 1 .......... BAG, LARGE, MODEL HCS13 ........... 539111300 ....... 1 .......... BAG, SMALL, MODEL HCS9 4 ..........

Page 33 - DRIVE KIT ASSEMBLY

33 DRIVE KIT ASSEMBLY ITEM PART NO. QTY DESCRIPTION 1 ......... 539109660 ...... 1 .......... DRAW LATCH2 ......... 539110740 ....... 2 .......... RIVET, BLIND, DOME STYLE, 5/32 DIA.3 ......... 539105743 ...... 1 .......... DECAL, NO STEP4 ......... 539105744 ...... 1 .......... DECAL, DANGER BELT D...