Husqvarna HA 850 - Manuals

English – 5 SAFETY INSTRUCTIONS Blade guard (HA 110) • Check that the blade guard is not damaged or distorted. • Replace the blade guard if it is bent or damaged. Gear housing • The gear housing gets hot when the machine has been in use. To avoid burning yourself do not touch the gear housing. Safet...

6 – English SAFETY INSTRUCTIONS • Do not cut too close to the ground. Stones and other objects can be thrown out. • Check the working area for foreign objects such as electricity cables, insects and animals, etc, or other objects that could damage the cutting attachment, such as metal items. • If an...

English – 9 ASSEMBLY Fitting the hand guard and loop handle (HA 110) 1 Loosen the clutch sleeve’s two mounting bolts and dismantle the clutch sleeve. 2 Assemble the hand guard and loop handle by screwing them together. Take care to align the holes in both parts. 3 Slide the loop handle and hand guar...

10 – English STARTING AND STOPPING Check before starting • Inspect the working area. Remove any objects that could be thrown out. • Check the cutting attachment. Never use blades that are dull, cracked or damaged. • Check that the machine is in perfect working order. Check that all nuts and screws a...

English – 11 MAINTENANCE Gear housing There are three grease nipples on the gear housing. Use a grease gun to top up with grease. This should be carried out approximately every 20 working hours. Use Husqvarna special grease, part no. 503 98 96-01. CAUTION! The gear housing must not be filled complet...