Husqvarna H354SG - Manuals

5 ASSEMBLY HANG SUPPORT ASSEMBLY ON REAR DRAWBAR (See Fig. 1) 1. Slide fl anges of support assembly into drawbar slots fi rst, then, pivot backwards inserting pin into drawbar pin hole. 2. Be sure support assembly is seated properly, then secure with retainer spring. 1 2 MOUNTING COVER ASSEMBLY TO SUP...

7 5 UPPER CHUTE (See Figs. 5A and 5B) 1. Lower mower to its lowest cutting position.2. Assemble upper chute by inserting curved end into hole in back of cover. TIP: Holding upper chute as shown and twisting while installing in cover will help keep the rubber seal in place. NOTE : Handle carefully so...

8 TIPS FOR IMPROVED BAGGING OPERA TION: Follow the mower operation instructions in your tractor owner's manual. When operating your grass catcher on a lawn where grass and leaf bagging equipment has not been used, you are picking up thatch and debris that has accumulated for long periods of time. Th...

9 STORAGE When grass catcher is to be stored for a period of time, clean it thoroughly, remove all dirt, grass, leaves, etc. Store in a clean, dry place. CAUTION: Do not leave grass in bagger containers. Empty containers after each use and before storing. Failure to do so may result in spontaneous c...

10 35 33 20 9 12 13 14 18 5 8 9 10 11 32 26 20 9 12 15 15 14 6 7 31 31 33 3 4 2 34 37 20 38 38 20 2 27 30 18 532187300 Chute, Lower20 871161010 Screw #10-24 x 5/826 532004939 Spring, Retainer27 532198128 Support Assembly30 532165898 Spring, Retainer31 532174083 Plug, Tubing End32 532176990 Bagger, F...