Husqvarna EA 850 - Manuals

English – 5 SAFETY INSTR UCTIONS P ersonal protection • Always wear boots and other equipment described under the heading Personal protective equipment. • Always wear working clothes and heavy-duty long trousers. • Never wear loose clothing or jewellery. • Make sure your hair does not hang below sho...

6 – English SAFETY INSTR UCTIONS Basic w orking techniques Saf ety instructions while working • Always ensure you have a safe and stable working position. • Always use both hands to hold the machine. Hold the machine at the side of your body. • Use your right hand to control the throttle setting. • ...

English – 7 ASSEMBLY Fitting the bevel gear Fit the bevel gear on the shaft. Turn the cutter so that the shaft engages in the bevel gear. Position the bevel gear so that the slot aligns with the line on the shaft. Firmly tighten the screw. Fitting the cutter Fit the cutter as follows: 1 Fit the driv...

8 – English STARTING AND STOPPING Starting and stopping Check before starting • For safety reasons follow these recommendations! • Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked. • Ensure the locking nut has...

English – 9 MAINTENANCE Bevel gear The bevel gear is filled with the right quantity of grease at the factory. However, before using the machine you should check that the bevel gear is filled three-quarters full with grease. Use HUSQVARNA special grease. The grease in the bevel gear does not normally...