Husqvarna DS50 - Manuals - manualsarea.com

Page 2 - KEY TO SYMBOLS; Symbols on the machine:; Symbols in the operator’s manual:

2 – English KEY TO SYMBOLS Symbols on the machine: WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using...

Page 3 - CONTENTS; Contents

English – 3 CONTENTS Contents KEY TO SYMBOLS Symbols on the machine: ............................................. 2 Symbols in the operator’s manual: ............................... 2 CONTENTS Contents ...................................................................... 3 WHAT IS WHAT? What is wh...

Page 4 - What is what on the stand?

4 – English WHAT IS WHAT? What is what on the stand? 19 1 2 3 5 8 10 11 12 13 14 15 22 18 21 20 16 23 27 30 24 31 25 29 28 28 28 26 17 4 6 7 9 1 Locking screw 2 Spirit level 3 Locking screw, locking clamp 4 Feeder housing lock 5 Locking screw drill column 6 Position ring 7 Locking screw, position ri...

Page 5 - SAFETY INSTRUCTIONS; Steps before using a new stand; Always use common sense; Personal protective equipment

English – 5 SAFETY INSTRUCTIONS Steps before using a new stand • Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. • This machine is designed for and intended for drilling concrete, brick and different stone materials. All other use i...

Page 6 - General safety precautions; Transport and storage; General working instructions; Basic safety rules

6 – English SAFETY INSTRUCTIONS General safety precautions • Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. • Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your...

Page 7 - PRESENTATION

English – 7 PRESENTATION Stand DS50 and DS70 It is our wish that you will be satisfied with your product and that it will be your companion for a long time. Think of this operator ′ s manual as a valuable document. By following its ′ content (using, service, maintenance etc) the life span and the se...

Page 8 - Accessories

8 – English PRESENTATION Accessories • Water collector • Quick mounting for automatic feed unit (both sides of feeder housing) • Retaining ring • Expander • Distance • Stabilizer For extra support.

Page 9 - ASSEMBLY; Assembling the stand

English – 9 ASSEMBLY Assembling the stand 1 Drill holes (15 mm) in the floor or in the wall and knock in the expander bolts. 2 Screw the base plate tight. Check carefully that the expander is secured correctly. • The drill column is mounted on the base plate’s angle bracket. Fasten the locking screw...

Page 10 - Before drilling

10 – English ASSEMBLY Before drilling ! WARNING! Before drilling, check that all locking screws are tightened well. Serious accidents can occur if the concrete core remains in the drill when backing out the drill motor/drill from the floor, wall or ceiling. ! WARNING! If the vacuum plate is used, ma...

Page 11 - MAINTENANCE; Stand maintenance; Cleaning and lubrication

English – 11 MAINTENANCE Stand maintenance The lifetime of your machine can be extended considerably if it is used, cared for and maintained in the proper manner. Cleaning and lubrication • It is important that the drill stand is kept clean for functionality to be maintained. • Clean the stand using...

Page 12 - TECHNICAL DATA; Dimensions; Expander

12 – English TECHNICAL DATA Dimensions Stroke , mm/inch --------------------- Expander ------------- Max. drill diameter, mm/inch DS50, mm/inch DS70, mm/inch 1 438/17,2 438/17,2 2 320/12,6 340/13,4 3 526/20,7 546/21,5 4 235/9,3 265/10,4 5 971/38,2 1026/40,4 6 1140/44,9 1205/47,4 7 177/7,0 - 8 231/9,...

Page 13 - Weight

English – 13 TECHNICAL DATA The column's angling Weight DS50, kg/lbs DS70, kg/lbs 1 Drill column 6,7/14,7 9,1/20,0 2 Feeder housing 7,8/17,2 9,7/21,3 3 Quick mounting 0,6/1,3 0,6/1,3 4 Feed lever - 0,8/1,8 5 Feed lever 0,8/1,8 - 6 Base plate 9,2/20,2 12,0/26,4 7 Transport wheels 4,1/9,0 4,1/9,0 Tota...

Page 14 - EC-declaration of conformity

14 – English TECHNICAL DATA EC-declaration of conformity (Applies to Europe only) Husqvarna Construction Products , SE-433 81 Partille, Sweden, tel: +46-31-949000, declares under sole responsibility that the stands Husqvarna DS50AT and DS70AT from 2007’s serial numbers and onwards (the year is clear...