Husqvarna DS160C - Manuals - manualsarea.com

Page 3 - WARNING; products and; ·REFER TO MANUAL·

WARNING Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: ·Lead from lead-base paints,·Crystalline silica from bricks and cement an...

Page 4 - Before commencing drilling, always ensure that; Improper Usage; This document will assist the user particularly in:

PREFACE TO THE MANUAL These operating instructions apply exclusively to drill stand, type DS 160 C. Please also readthe operating instructions that accompany your drill motor to verify their compatibility andnot to exceed the limitations of the DS 160 C drill stand. Usage to the Intended Purpose The...

Page 7 - The use of ear protection is mandatory.

3. Assembly Align holes on the wheel assembly (1) with the tappedholes on rear of the base plate (2). Insert bolts (3)through lockwashers (4), then insert bolts through wheelassembly and screw onto base plate. 4. Description and Features of the Drill Stand Tapered roller carriage.Sealed ball bearing...

Page 8 - Fitting and Removing the Motor; Unplug the motor from the outlet.; Electrical Connection; up to 50 m or double for longer cables.

The operator must wear protective clothing appropriate to the work he is doing. Werecommend that this includes both eye and ear protection. Any person not involved in the work should leave the working area. Use core bits which are suitable for the work to be done. 7. Fitting and Removing the Motor U...

Page 9 - Designation of the Components

10. Designation of the Components Carrying Handle Feed Handle Back Support Carriage Level and Plum Indicator Carriage Brake Drill Motor Mount Gear Rack Depth and Angle Scale Angle Column Lock Screw Leveling Screws Wheel Assembly(Removable) Vacuum Cap(Removable) Base Plate w/ IntegratedVacuum Vacuum ...

Page 10 - Operation Positions

11. Operation Positions The drill stand can be used for drilling ceilings, floors and walls. Individual safety instructionsfor each area of applications as described in the following chapters must be observed and complied with. The three main drilling directions (area of application) are:Floor posit...

Page 11 - Fastening by means of a Vacuum Plate

Drill a hole for the anchor at a distance of 292mm ( X ) from the hole center. Drive the impact anchor and secure. Screw in the all thread rod (2). Slip on the base plate (4) over the thread rod. Fit the washer and tighten nut (1) slightly. Align the base plate (4) by means of theadjusting screw (3)...

Page 12 - Mount the drill carriage.; Operating the Feed; Pull off the feed handle in an axial direction.

13. Setting the Angle of the Column Remove the column lock bolt (1) Loosen bolt on back support bracket (2). The column can now be pulled into the desired position, 0 to 45 degrees. Side decal provides approximate measurements. If greater precision isrequired use alternate measuring techniques.Maxim...

Page 20 - Roller

Item Description Part Number Qty Comments 1 Roller 541404037 1 2 Spacer 541404036 1 3 Bearing 12mmI.D.x24mmO.D.x6mm 541404034 2 1 2 3 132

Page 21 - Angle Support Member

Item Description Part Number Qty Comments 1 Angle Support Member 541404062 2 2 Angle Support Spacer 541404064 1 3 T-Washer Retainer 541404065 1 4 M6x20 Flat Socket Head Screw 541404138 2 5 M8 Socket Head Shoulder Screw 541404139 2 6 Angle Support Bushing 541404063 2 1 6 5 4 2 3 133

Page 22 - Ball Detent

1 2 3 4 5 Item Description Part Number Qty Comments 1 Knob w/Stud 541404073 1 2 1/8 NPT Male Fitting 541404071 1 3 Ball Detent 541404072 2 4 Vacuum Cap 541404068 1 5 Vacuum Cap Gasket 541404070 1 134

Page 23 - HUSQVARNA CONSTRUCTION PRODUCTS; Product Limited Warranty

HUSQVARNA CONSTRUCTION PRODUCTS Product Limited Warranty Equipment manufactured by Husqvarna Construction Products is warranted to be free from defects in material and workmanship if operated properly, without abuse or negligence innormal service applications for a period of two (2) years from date ...