Husqvarna 968999196 - Manuals

Page 2 - INDEX

2 Operators Guide Specifications ............................................................................................ 3Features and Controls ............................................................................... 4General Information .....................................................

Page 3 - SPECIFICATIONS

3 Length 38 in. (97 cm.) Width (without hose or blower) 34.5 in. (94 cm.) Width (with hose and blower) 49 in. (124 cm.) Deck Options 42”48” Weight (without spindle drive/blower assembly) 170 lb. (77 kg.) Weight (with spindle drive/blower assembly) 235 lb. (107 kg.) Total Capacity 11.5 cu ft (9.2 bu....

Page 5 - SAFETY RULES

5 SAFETY RULES Safety Procedures 1 - Training: • Read the Operator’s manual. If the operator(s) or mechanic(s) can not read English it is theowner’s responsibility to explain this material tothem. • Become familiar with the safe operation of the equipment, operator’s controls, and safetysigns. • All...

Page 7 - Unpacking Instructions; Assembly Instructions; Frame Assembly; ASSEMBLY

7 Unpacking Instructions 1. Wear gloves and eye protection. Remove wood pieces. 2. Cut straps around carton and remove top. NOTE: Watch for nails and wood splinters. 3. Slide carton sleeve out of bottom tray and lift over Z1-9. Assembly Instructions Frame Assembly UpperFrame LowerFrame ASSEMBLY Tool...

Page 11 - Operating the Vacuum; OPERATION

11 Operating the Vacuum 1. NEVER USE THE Z1-9 WITHOUT ALL HOSES AND SHIELDS SECURELY AT-TACHED. 2. Make sure all hoses are connected at both ends. Inspect hoses prior to each use. 3. Do not use the Z1-9 on slopes greater than 15 degrees. 4. The mower must be running in order to vacuum debris through...

Page 12 - SERVICE AND MAINTENANCE; Cleaning and Washing

12 SERVICE AND MAINTENANCE WARNING The Z1-9 container must be completelyempty while driving forward onto a trailer.If the Z1-9 must be loaded onto a trailerwhile there is still debris in the container,the mower must be backed up onto thetrailer to avoid tipping. Cleaning and Washing Regular cleaning...

Page 14 - Trouble Shooting Guide

14 PROBLEM POSSIBLE CAUSE CORRECTION Engine Does Not Start. 1. Spark plug wire disconnected. 1. Reconnect wire. 2. Engine ON/OFF switch in OFF position. 2. Put switch in ON position.3. Fuel tank empty. 3. Add gasoline. 4. Stale gasoline. 4. Drain gasoline and add fresh gasoline. 5. Dirty air filter....

Page 15 - PARTS ILLUSTRATION

Page 16 - CONTAINER ASSEMBLY

16 CONTAINER ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 17 17 7 8 12 4 26 27 28

Page 18 - FRAME ASSEMBLY

18 ITEM PART NO. QTY DESCRIPTION 1 ......... 540062072 ....... 1 .......... LOWER FRAME2 ......... 540200510 ....... 1 .......... UPPER FRAME3 ......... 540099069 ....... 8 .......... BOLT, 1/2-13 X 1 1/44 ......... 540099020 ....... 4 .......... BOLT, 3/8-16 X 1 1/45 ......... 540093082 ....... 8 ....

Page 19 - HITCH & FRONT WEIGHT BAR ASSEMBLY

19 SEE INSTRUCTION SHEET INCLUDED WITH CUSTOM KIT FOR PARTS LIST. 540092531 FRONT WEIGHT QTY 2 INCLUDED WITH COLLECTION UNIT QTY 1 INCLUDED WITH CUSTOM KIT 540200809 540099668 540092731 540200932 HITCH & FRONT WEIGHT BAR ASSEMBLY

Page 20 - SPINDLE DRIVE ASSEMBLY

20 SPINDLE DRIVE ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 39 40 41 42 43 44 45 23 27 21 28 28 29 27 15 8 29 28 14 38 46 46

Page 22 - DRIVE KIT ASSEMBLY

22 DRIVE KIT ASSEMBLY ITEM PART NO. QTY DESCRIPTION 1 ......... (539) 108950 .... 1 .......... 42 SHIELD ........... (539) 108953 .... 1 .......... 48 SHIELD........... (539) 108958 .... 1 .......... 52 SHIELD........... (539) 108959 .... 1 .......... 61 SHIELD 2* ........ (539) 106739 .... 1 .........