Husqvarna 96732400200 - Manuals

5 INTRODUCTION Good Service Husqvarna's products are sold throughout the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and...

R N 6 SYMBOLS AND DECALS These symbols are found on the machine and in the operator manual.Study them carefully so that you know what they mean. IMPORTANT INFORMATION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. WARNING! Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxx...

7 SAFETY WARNING! THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. General Operation • Read, understand, and follow all instructions on the machine and in the manual before...

8 SAFETY • Always wear eye protection when operating machine.• Wear proper Personal Protective Equipment (PPE) while operating this machine, including (at a minimum) sturdy footwear, eye protection, and hearing protection. Do not mow in shorts and/or footwear with open toes. WARNING! Do not drive up...

9 SAFETY • Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle. • Keep the nozzle in contact with the rim of the fuel tank or container opening at al...

10 SAFETY Transport Towing If machine is equipped with a tow hitch, use extreme caution when towing. Never allow children or others in or on towed equipment..Make wide turns to avoid jack-knifing. Travel slowly and allow extra distance to stop. Do not tow on sloped ground. The weight of the towed eq...

11 CONTROLS This operator manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a four-stroke overhead valve engine.Transmission from the engine is made via a belt-driven hydraulic pumps. Using the left and right steering controls, the flow is regulates the direction and speed. Co...

Forward Neutral Reverse Park Brake 12 CONTROLS Steering Control Levers WARNING! The machine can turn very rapidly if one steering control is moved much further forward than the other. The machine’s speed and direction are continuously variable using the two steering controls. The steering controls c...

13 CONTROLS Blade Switch Throttle Control The throttle control regulates the engine speed and the rate of rotation of the blades, assuming the blade switch is pulled out. See Blade Switch.To increase or decrease the engine speed, the control is moved forward or back respectively.Avoid idling the eng...

14 CONTROLS Fuse The 20 amp primary fuse is located on the left hand side of the machine. It is accessed by tilting the seat forward. The fuse is a flat pin type used in automobiles. Fuel Shut Off Valve The fuel shut off valve is located at the right rear of the seat. The valve is off when the handl...

15 CONTROLS Fuel Tank IMPORTANT INFORMATION Experience indicates that alcohol blended fuels (called gasohol, ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine...

16 OPERATION Read the Safety section and following pages, if you are unfamiliar with the machine. Training Due to unique steering capabilities, zero turn mowers are far more maneuverable than typical riding mowers.This section should be reviewed in its entirety prior to attempting to move the mower ...

17 OPERATION 4. Move the steering / park brake controls out to the locked position. 5. Move the throttle lever to the full throttle position. NOTE: There is a detent at the full throttle position to aid in setting the control. 6. Press in and turn the ignition key to the start position. 7. When the ...

18 OPERATION Stopping the Engine 1. Move the throttle to the minimum position (tortoise symbol). 2. Move the steering / park brake controls outward from the neutral position. 3. Disengage the mower deck by pressing the blade switch down. 4. Raise the mower deck to the highest position. If the engine...

19 OPERATION IMPORTANT INFORMATION The mower is equipped with a 12-volt negative grounded system. The other vehicle must also be a 12-volt negative grounded system. Do not use your mower to start other vehicles. CAUTION! Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking ma...

20 MAINTENANCE Maintenance Schedule The following is a list of maintenance procedures that must be performed on the machine. For those points not described in this manual, visit an authorized service workshop. An annual service carried out by an authorized service workshop is 1) First change after 8...

21 MAINTENANCE WARNING! Before performing any service or adjustment checklist• Engage the park brake. • Place the Blade-switch in the disengaged position. • Turn the ignition switch to OFF position and remove the key. • Make sure the blades and all moving parts have completely stopped. MAINTENANCE D...

22 MAINTENANCE Battery Your mower is equipped with a maintenance free battery that does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life. • Keep battery and terminals clean.• Keep battery bolts tight.• See chart for charging t...

23 MAINTENANCE Safety System The machine is equipped with a safety system that prevents starting or driving under the following conditions.The engine can only be started when: • the mower deck is disengaged.• the steering / park brake controls are in the outer, locked neutral position. IMPORTANT INF...

24 MAINTENANCE Caster Wheels Check every 200 hours. Check that wheels rotate freely. If wheels do not rotate freely take the unit to your dealer for service.Foam filled tires or solid tires will void the warranty. Removal and installation Remove nut and caster bolt. Pull the wheel out of the yoke an...

25 MAINTENANCE Adjusting the Mower Deck Leveling deck Adjust the deck while the mower is on a level surface. Make sure the tires are inflated to the correct pressure. See Technical Data / Transmission. If tires are under or over inflated, the deck cannot be properly adjusted. Raise the deck to the h...

26 MAINTENANCE Cleaning Regular cleaning, especially under the mower deck, will increase the machine’s life-span. Make it a habit to clean the machine directly after use (after it is cooled), before the debris sticks.Do not spray water on the top of the mower deck. Use compressed air to clean the to...

27 LUBRICATION General Remove the ignition key to prevent unintentional movements during lubrication.When lubricating with an oil can, it must be filled with engine oil.When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulphide grease.For daily use, the machine sho...

28 TROUBLESHOOTING Problem / Cause Engine will not start Blade switch is engagedSteering controls are not locked in the outer positionBattery is deadContamination in the carburetor or fuel lineFuel supply shutoff valve is closedClogged fuel filter or fuel lineIgnition system faulty Starter does not ...

29 STORAGE Winter Storage The machine should be readied for storage at the end of the mowing season or if it will not be in use for more than 30 days. Fuel allowed to stand for long periods of time (30 days or more) can leave sticky residues that can plug the carburetor and disrupt engine function.F...

31 TECHNICAL DATA Engine Frame Manufacturer Briggs & Stratton Cutting Width 46" / 117cm Type 44S777 Endurance Cutting Height 1.5" - 4" / 3.8 - 10.2 cm Power 23 1) Uncut Circle 0 Lubrication Pressure with oil filter Number of Blades 2 Fuel Min 87 octane unleaded (Max ethanol 10%, Max ...

32 TECHNICAL DATA Accessories Collection system Engine crankshaft bolt 75 ft/lb (102 Nm) Deck pulley bolts 75 ft/lb (102 Nm) Lug nuts 75 ft/lb (102 Nm) Blade bolt 60 ft/lb (81 Nm) Standard ¼" fasteners 9 ft/lb (12 Nm) Standard 5 / 16 " fasteners 18 ft/lb (25 Nm) Standard 3 / 8 " fastener...

33 SERVICE JOURNAL Action Date, mtr reading, stamp, sign Delivery Service Charge the battery q Adjust the tire pressure of all wheels to 15 PSI (1 bar) q Mount the steering controls in the normal position q Connect the contact box to the cable for the seat’s safety switch q Check that the right amou...

34 SERVICE JOURNAL Action Date, mtr reading, stamp, sign Date, mtr reading, stamp, sign Date, mtr reading, stamp, sign 25-Hour Service Check the fuel pump’s air filter q Sharpen/Replace mower blades if required q Check the tire pressures q Check battery cables q Lubricate according to lubrication ch...

36 SERVICE JOURNAL Action Date, mtr reading, stamp, sign At Least Once Each Year Clean the engine’s cooling air intake (25 hours) q Replace the air cleaner’s foam pre-filter (300 hours) q Replace the air filter’s paper cartridge q Change the engine oil (50 hours) q Replace the engine oil filter (100...