Husqvarna 536LiLX - Manuals

GENERAL SAFETY PRECAUTIONS English – 7 General power tool safety warnings Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Check before starting • Always remove the battery to prevent the machine being started by accident. Always rem...

GENERAL SAFETY PRECAUTIONS 8 – English • Don’t force the machine. It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed. • Never use the machine in bad weather, for instance in fog, in rain, damp or in wet locations,strong winds, intense cold, r...

GENERAL SAFETY PRECAUTIONS English – 9 BOOTS Wear sturdy, non-slip boots. CLOTHING Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches. Always wear heavy, long pants. Do not wear jewellery, shorts sandals or go barefoot. Secure hair so it is above shoul...

GENERAL SAFETY PRECAUTIONS 10 – English • Regularly check that the battery charger connection wire is intact and that there are no cracks in it. • Never carry the battery charger using the cord and never pull out the plug by pulling the cord. • Keep all cables and extension leads away from water, oi...

GENERAL SAFETY PRECAUTIONS English – 11 • the machine is overloaded due to heavy trimming. Release the power trigger and the machine is active. If the warning symbol (3) flashes, it indicates that the machine is too hot and the machine deactivates. When the machine is restored to normal temperature ...

GENERAL SAFETY PRECAUTIONS 12 – English Always remove the battery before you work on any part of the cutting equipment. It continues to rotate even after the throttle control has been released. Check that the cutting equipment has stopped completely and remove the battery before you start any work o...

ASSEMBLY English – 13 Fitting the loop handle • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. • Slide the spacer into the slot in the loop handle. • Fit the nut, knob and screw. Do not overtighten. • Now adjust the trimmer to give a co...

BATTERY HANDLING 14 – English Battery The display shows the battery capacity and if there are any problems with the battery. The battery capacity is displayed for 5 seconds after the machine is switched off or the battery indicator button is pressed. The warning symbol on the battery is lit when an ...

BATTERY HANDLING English – 15 Transport and storage • The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. • For commercial transports e.g. by third parties, forwarding agents, special requirement on packing and labeling must be observed. • For preparation...

STARTING AND STOPPING 16 – English Check before starting • Check the motor for dirt and cracks. Clean off grass and leaves from the engine using a brush. Gloves should be worn when necessary. • Check that the trimmer head is completely attached to the trimmer. • Check that the machine is in perfect ...

WORKING TECHNIQUES English – 17 General working instructions Basic safety rules Wear personal protective equipment. See instructions under the ”Personal protective equipment” heading. 1 Look around you: • To ensure that people, animals or other things cannot affect your control of the machine. • To ...

WORKING TECHNIQUES 18 – English • Release the power trigger after each working operation to save battery power. Safety instructions after completing work • Make sure the cutting attachment has stopped before cleaning, carrying out repairs or an inspection. Remove the battery from the machine. SavE m...

WORKING TECHNIQUES English – 19 Grass trimming with a trimmer head Trimming • Hold the trimmer head just above the ground at an angle. It is the end of the line that does the work. Let the line work at its own pace. Never press the line into the area to be cut. • The line can easily remove grass and...

MAINTENANCE 20 – English Inspection and maintenance All servicing and repair work on the machine requires special training. This is especially true of the machine ′ s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of ou...

English – 21 MAINTENANCE Troubleshooting schedule Keypad Troubleshooting takes place from the keypad. Troubleshooting the battery and/or the battery charger during charging. Battery Battery charger Control panel Possible faults Possible action Green activate LED flashing. Low battery voltage. Chargi...

22 – English MAINTENANCE Maintenance schedule The following is a list of the maintenance steps that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator's Manual. More ex...

English – 23 TECHNICAL DATA Technical data Use only a Husqvarna original BLi battery in your machine. Note 1: Noise emissions in the environment measured as sound power (L WA ) in conformity with EC directive 2000/14/ EC. The difference between guaranteed and measured sound power is that the guarant...

24 – English TECHNICAL DATA EC Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the battery lawn trimmers Husqvarna 536LiLX with serial numbers dating from 2016 onwards (the year is clearly stated on the rating plate, followed by the serial nu...