Husqvarna 536LiHE3 - Manuals

GENERAL SAFETY PRECA UTIONS 6 – English General po wer tool safety warnings Please read the oper ator’s manual carefully and make sure you understand the instructions before using the machine. The machine is only designed for cutting branches and twigs. Always remove the battery to prevent the machi...

GENERAL SAFETY PRECA UTIONS English – 7 Batter y tool use and care • Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. • Use power tools only with specifically designate...

GENERAL SAFETY PRECAUTIONS 8 – English Personal protective equipment HEARING PROTECTION Wear hearing protection that provides adequate noise reduction. EYE PROTECTION Always wear approved eye protection. If you use a visor then you must also wear approved protective goggles. Approved protective gogg...

GENERAL SAFETY PRECAUTIONS English – 9 • Use the battery in surroundings where temperatures are between -10 ° C and 40 ° C. • Do not expose the battery to microwaves or high pressure. • Never clean the battery or the battery charger with water. See instructions under the Maintenance heading. • Store...

GENERAL SAFETY PRECAUTIONS 10 – English Control panel Make sure the machine is switched on or off when the activate/deactivate button (1) is pressed and held (>1 sec.). The green LED (2) is lit or turned off. Flashing warning indicator (3) and green LED (2) is lit could indicate that: • it is not...

GENERAL SAFETY PRECAUTIONS English – 11 Hand guard The hand guard prevents hands from coming into contact with the moving blades, for example, if the operator loses grip on the front handle. • Check that the hand guard is fitted correctly. • Check that the hand guard is undamaged. Li-ion Li-ion

BATTERY HANDLING 12 – English Battery The display shows the battery capacity and if there are any problems with the battery. The battery capacity is displayed for 5 seconds after the machine is switched off or the battery indicator button is pressed. The warning symbol on the battery is lit when an ...

BATTERY HANDLING English – 13 Transport and storage • The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. • For commercial transports e.g. by third parties, forwarding agents, special requirement on packing and labeling must be observed. • For preparation...

STARTING AND STOPPING 14 – English Check before starting • Inspect the working area. Remove any objects that could be thrown out. • Check the cutting attachment. Never use blades that are dull, cracked or damaged. • Check that the machine is in perfect working order. Check that all nuts and screws a...

WORKING TECHNIQUES English – 15 General working instructions Basic safety rules • Wear personal protective equipment. See instructions under the ”Personal protective equipment” heading. • Never allow children to use or be in the vicinity of the machine. • Observe your surroundings and make sure that...

WORKING TECHNIQUES 16 – English • Always use both hands to hold the machine. Hold the machine at the side of your body. • Make sure that no clothes or parts of the body come in contact with the cutting equipment when it is activated. • When the motor is switched off, keep your hands and feet away fr...

WORKING TECHNIQUES English – 17 Changing the hedge trimmer angle Remove the battery from the machine. The cutting unit has 8 adjustment positions to make work easier. • Pull down the position adjustment handle. • Tilt the cutting unit with its handle to the desired position. • Release the position a...

MAINTENANCE 18 – English Inspection and maintenance All servicing and repair work on the machine requires special training. This is especially true of the machine ′ s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of ou...

English – 19 MAINTENANCE Troubleshooting schedule Control panel Troubleshooting takes place from the keypad. Troubleshooting the battery and/or the battery charger during charging. Battery Battery charger LED display Possible faults Possible action Green activate LED flashing. Low battery voltage. C...

20 – English MAINTENANCE Maintenance schedule The following is a list of the maintenance steps that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator's Manual. More ex...

English – 21 TECHNICAL DATA Technical data Note 1: Noise emissions in the environment measured as sound power (L WA ) in conformity with EC directive 2000/14/ EC. The differnce between guaranteed and measured sound power is that the guaranteed sound power also includes dispersion in the measurement ...

22 – English TECHNICAL DATA EC Declaration of Conformity (Applies to Europe only) Husqvarna AB , SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare under sole responsibility that the hedge trimmers Husqvarna 5 3 6LiHE 3 from 2016’s serial numbers and onwards (the year is clearly stated in plai...

1158 3 48-26 ´®z+ZBr¶6;¨ ´®z+ZBr¶6;¨ 2016-10-07 Husqvarna AB SE-561 82 Huskvarna Visiting address: Drottninggatan 2