Husqvarna 535iFR - Manuals

Blade thrust causes and related warnings • Blade thrust is a sudden sideways, forward or backward motion of the machine, which may occur when the blade jams or catches on an object such as a sapling or a tree stump. It can be violent enough to cause the machine and/or operator to be propelled in any...

or the cutting equipment rotates, as this can result in serious injury. • Keep in mind that it is you, the operator that is responsible for not exposing people or their property to accidents or hazards. • Under no circumstances may the design of the product be modified without the permission of the ...

Cutting attachment WARNING: Remove the battery and make sure that the cutting attachment stops completely before you work on any part of the cutting attachment. WARNING: Use correct cutting attachment. Only use the cutting attachment with the guards we recommend, refer to Accessories on page 30. Mak...

• Do not clean the battery or the battery charger with water. Strong detergent can cause damage to the plastic. • If you do not do maintenance, it decreases the life cycle of the product and increases the risk of accidents. • Special training is necessary for all servicing and repair work, especiall...

the cutting attachment. See Accessories on page 30. WARNING: An incorrectly attached cutting attachment can result in injury or death. Cutting equipment and guards WARNING: Stop the product and remove the battery. Use protective gloves. The product have different cutting attachment guards for the cu...

3. Remove the support flange (F) and the saw blade (D) from the output shaft. F G D B C 4. Remove the drive disc (B) from the output shaft. To adjust the Balance XB harness (535iRXT) 1. Put the harness on.2. Push the 2 parts of the breastplate together as shown in the illustration. 3. Tighten the hi...

WARNING: Use the harness quick release function if you must release from the product and the harness in an emergency situation. 1. Put on the harness.2. Adjust the harness for the best work position.3. Adjust the side straps until the weight is equally applied across your shoulders. 4. Adjust the ha...

• Keep body parts away from the hot surfaces.• Keep body parts away from the cutting attachment. Correct balance of the product For forestry clearing, the product is correctly balanced when it freely hangs horizontally from the suspension point. With correct balance, the risk of hitting stones if yo...

all directions. There is a risk of injury to the operator and bystanders.The risk increases in areas where it is not easy to see the material that should be cut.Do not cut with the area of the blade that is shown in grey in the illustration. The speed and movement of the blade can cause blade thrust...

3. Tilt the saw blade and push it with force diagonally up and to the right. At the same time, push the tree with the blade guard. To fell a tree forward To fell forward, push the bottom of the tree rearward.1. Apply full throttle.2. Put the saw blade against the tree as given in the picture. 3. Pul...

2. A grass blade is used for all types of tall or coarse grass. 3. The grass is cut down with a sideways, swinging movement, where the movement from right-to-left is the clearing stoke and the movement from left-to- right is the return stoke. Let the left-hand side of the blade (between 8 and 12 o'c...

To stop the product 1. Release the power trigger and the power trigger lockout. 2. Press the start/stop button until the green LED is out. 3. Press the release buttons on the battery and pull the battery out. Maintenance Introduction WARNING: Before you do any maintenance work you must read and unde...

• Sharpen one tooth of the saw blade to the right and the next tooth to the left, see the illustration. 15˚ Note: Sharpen the edges of the teeth with a flat file if the blade is heavily worn. Continue to sharpen with a round file. • Sharpen all edges equally to keep the blade balanced. • Adjust the ...

Problem Possible faults Possible action Error LED flashes red Overload. The cutting attachment is jammed. Stop the product. Remove the battery. Clean the cut- ting attachment from unwanted materials. Temperature deviation. Let the product cool down. The power trigger and the acti- vate button are pr...

535iFR 535iRXT 535iRX Motor type Husqvarna e-torq BLDC Husqvarna e-torq BLDC Husqvarna e-torq BLDC Speed of output shaft. Trimmer head/blade, 1/min 5300/8200 5300/8200 5300/8200 Cutting width, mm/in 450/17.7 450/17.7 450/17.7 Weight Weight without battery, kg/lb 4.5/9.9 4.9/10.8 4.9/10.8 Noise emiss...

Battery BLi300 40-B330X Weight, kg (lb) 1.9 (4.2) 2 (4.4) Approved battery chargers Battery charger QC500 40-C750X Input voltage, V 100-240 100-240 Frequency, Hz 50-60 50-60 Power, W 500 750 Accessories Accessories Approved accessories Accessory type Cutting attachment guard, art. no. Centre hole in...

Declaration of Conformity EU Declaration of conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated brushcutter / grass trimmer Brand Husqvarna Type / Model 535iFR, 535iRXT, 535iRX Identification ...