Husqvarna 525RJX - Manuals

ANSI Z87.1 standard in the USAs or EN 166 in EU countries. • Use gloves when necessary, for example when you attach, examine or clean the cutting equipment. • Use protective boots with steel toes and non-slip soles. • Use clothing made of a strong fabric. Always use heavy, long pants and long sleeve...

• Examine the cutting attachment for damage and cracks. Replace the damaged cutting attachment. • Only use cutting attachments with recommended guards. See Accessories on page 25. To sharpen the grass knife and grass blade WARNING: Stop the engine. Use protective gloves. • To sharpen the grass knife...

• Never start the product if the product is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines. • Always put the product on a flat surface and make sure the cutting attachment cannot come in contact with any object while you add fuel. • Take care when handling fuel. Bear in min...

To attach the grass blade and the grass blade guard/combination guard 1. Put the blade guard/combination guard (A) onto the shaft and tighten the bolt to attach it. G F D B C A E 2. Turn the output shaft to align 1 of the holes in the drive disc (B) with the related hole in the gear housing. 3. Put ...

• Start the movement from right to left when you cut. Move the product to the right before you cut again. • Cut with the left side of the grass blade. • Angle the grass blade to the left to make the grass fall in a line. This makes it easy to collect the grass. • Keep a stable position with your fee...

3. Move the product from side to side when you cut grass. Use full speed. To sweep the grass The airflow from the rotating trimmer line can be used to remove cut grass from an area.1. Hold the trimmer head and the trimmer line parallel to the ground and above the ground. 2. Apply full throttle.3. Mo...

Troubleshooting The engine does not start Check Possible cause Procedure Stop switch. The stop switch is in the stop position. Set the stop switch to the start position. Starter pawls. The starter pawls cannot move freely. Remove the starter cover and clean around the starter pawls. Let an approved ...

Disposal • Obey the local recycling requirements and applicable regulations. • Discard all chemicals, such as engine oil or fuel, at a service center or at an applicable disposal location. • When the product is no longer in use, send it to a Husqvarna dealer or discard it at a recycling location. Te...

525RJX Sound power level, guaranteed L WA dB (A) 106 Sound levels 2 Equivalent sound pressure level at the operator’s ear, measured according to EN ISO 11806 and ISO 7917, dB(A) Equipped with trimmer head (original) 94 Equipped with grass blade (original) 93 Vibration levels 3 Equivalent vibration l...

Declaration of Conformity EC Declaration of conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Brush cutter Brand Husqvarna Type / Model 525RJX Identification Serial numbers dating from 2024 and onwards compl...

UK Declaration of conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Brush cutter Brand Husqvarna Type / Model 525RJX Identification Serial numbers dating from 2024 and onwards complies fully with the followi...

1 3 4 5 2 6 7 8 B Tri Cut x 10 A 6 Nm 28 1927 - 002 - 13.03.2024