Husqvarna 525PT5S - Manuals

• Do a visual check on the spark arrestor mesh. Refer to To do maintenance on the muffler on page 16. Fuel safety WARNING: Read the warning instructions that follow before you use the product. • Do not mix the fuel indoor or near a heat source.• Do not start the product if there is fuel or engine oi...

• Keep the correct depth gauge setting. Obey the instructions and use the recommended depth gauge setting. • Make sure that the saw chain has the correct tension. If the saw chain is not tight against the guide bar, the saw chain can derail. An incorrect saw chain tension increases wear on the guide...

Operation Introduction WARNING: Before you operate the product, you must read and understand the safety chapter. To check before starting 1. Inspect the working area. Remove any objects that could be thrown out. 2. Check the saw chain. Never use blunt, cracked or damaged equipment. 3. Check that the...

1. Fill half the quantity of gasoline in a clean container for fuel. 2. Add the full quantity of oil.3. Shake the fuel mixture.4. Add the remaining quantity of gasoline to the container. 5. Carefully shake the fuel mixture. CAUTION: Do not mix fuel for more than 1 month at a time. To fill the fuel t...

• Whenever possible position yourself so that you can make the cut at right angles to the branch. 90° • Do not work with the shaft held straight out in front of you (like a fishing rod) as this increases the apparent weight of the cutting attachment. • Cut large branches in sections so that you have...

WARNING: The saw chain will start to rotate immediately when you start the engine with the choke. To start the product WARNING: Read the warning instructions in the safety chapter before you start the product (refer to Safety on page 4). 1. Use protective gloves.2. Hold the body of the product on th...

More extensive work must be carried out by an authorized service workshop. Maintenance Daily Weekly Monthly Clean the external surface. X Make sure that the throttle trigger lock and the throttle works correctly. X Do a check of the stop switch to make sure that it works correctly. X Make sure that ...

2. If the saw chain lubrication does not operate correctly, do a check of the guide bar. Refer to To do a check of the guide bar on page 18 for instructions. Speak to your servicing dealer if the maintenance steps does not help. To adjust chain lubrication WARNING: Stop the engine before you make ad...

Transportation, storage and disposal Transportation and storage • For storage and transportation of the product and fuel, make sure that there are no leaks or fumes. Sparks or open flames, for example from electrical devices or boilers, can start a fire. • Always use approved containers for storage ...

525PT5S Noise emissions 1 Sound power level, measured according to ISO 22868,dB (A) 107 Sound levels 2 Equivalent sound pressure level at the operator’s ear, measured according to ISO 22868, dB(A): Equipped with approved accessory (original) 89 Vibration levels 3 Vibration levels at handles, measure...

Declaration of Conformity EU Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Pole saw Brand Husqvarna Type / Model 525PT5S Identification Serial numbers dating from 2022 and onwards complies...

UK Declaration of conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Pole saw Brand Husqvarna Type / Model 525PT5S Identification Serial numbers dating from 2022 and onwards complies fully with the following ...