Husqvarna 525iRXT - Manuals

while clearing jammed material or servicing may result in serious personal injury. Blade thrust causes and related warnings • Blade thrust is a sudden sideways, forward or backward motion of the machine, which may occur when the blade jams or catches on an object such as a sapling or a tree stump. I...

• Do not remove the cut material, or let other persons remove cut material, while the product is activated or the cutting equipment rotates, as this can result in serious injury. • Keep in mind that it is you, the operator that is responsible for not exposing people or their property to accidents or...

• Always use approved protective googles that comply with ANSI Z87.1 standard in the USA or EN 166 in EU countries.Use visor for face protection. Visor is not enough to protect the eyes. + • Use gloves when it is necessary, for example when you attach, examine or clean the cutting equipment. • Use p...

To do a check of the cutting attachment guard WARNING: Do not use a cutting attachment without an approved and correctly attached cutting attachment guard. Always use the recommended cutting attachment guard for the cutting attachment that you use, see Accessories on page 25. If an incorrect or faul...

Trimmer head• Always use the correct trimmer head, cutting attachments and always use the recommended trimmer line. Refer to Accessories on page 25 and the assembly in the end of the Manual. • Make sure that the cutter on the trimmer guard is not damaged. • Make sure that the trimmer line is wound t...

7. Tighten the nut with the socket wrench. Hold the shaft of the socket wrench near the blade guard. Tighten in the opposite direction to how the cutting attachment rotates. Tighten it to a torque of 35-50 Nm. To remove the grass blade 1. Put the gear of the product on a flat surface to make sure th...

3. Remove the nut that holds the trimmer head and the drive disc. 4. Remove the trimmer head. To adjust the Balance XB harness 1. Put the harness on.2. Push the 2 parts of the breastplate together as shown in the illustration. 3. Tighten the hip strap tightly. Make sure that the hip strap aligns wit...

Operation Introduction WARNING: Read and understand the safety chapter before you use the product. To connect the battery to the product WARNING: Only use Husqvarna original batteries with the product. 1. Make sure that the battery is fully charged.2. Push the battery into the battery holder of the ...

when you hit objects, for example, stones and/or hard surfaces.• Push the ErgoFeed button to start the automatic adjustment of the trimmer line. Automatic shutdown function The product has a shutdown function that stops the product if the product is not used. The green LED for start/stop indication ...

3. Do not let the trimmer head touch the ground continuously, it can cause damage to the trimmer head. 4. Use full speed when you move the product from side to side to cut grass. Make sure that the grass trimmer line is parallel to the ground. To sweep the grass The airflow from the rotating trimmer...

Maintenance Introduction WARNING: Before you do any maintenance work you must read and understand the safety chapter. Maintenance schedule WARNING: Remove the battery before you do maintenance. The following is a list of the maintenance steps that you must do on the product. Maintenance Daily Weekly...

Troubleshooting User interface Problem Possible faults Possible action Battery LED indicator flashes or- ange Low battery voltage. Charge the battery. Error LED flashes red Overload. The cutting attachment is jammed. Stop the product. Remove the battery. Clean the cut- ting attachment from unwanted ...

Technical data Technical data 525iRXT Motor Motor type Husqvarna e-torq BLDC Speed of output shaft. Trimmer head/blade, n 0 5500/7200 Cutting width, mm/in 450/18.1 Weight Weight without battery, kg/lb 4.2/9.1 Noise emissions 1 Sound power level, measured dB (A) 92 Sound power level, guaranteed L WA ...

Battery BLi300 40-B330X Nominal voltage, V 36 36 Weight, kg (lb) 1.9 (4.2) 2 (4.4) Approved battery chargers Battery charger QC500 Input voltage, V 100-240 Frequency, Hz 50-60 Power, W 500 Accessories Accessories Approved accessories Accessory type Cutting attachment guard, art. no. Centre hole in b...

Declaration of Conformity EU Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated brushcutter / grass trimmer Brand Husqvarna Type / Model 525iRXT Identification Serial numbers d...

UK Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated brushcutter / grass trimmer Brand Husqvarna Type / Model 525iRXT Identification Serial numbers dating from 2023 and onward...